Loss of the RH FLP SYNC Signal Output of the Flap IPPU to the FWC 1

TASK 31-53-00-810-887-A
Loss of the RH FLP SYNC Signal Output of the Flap IPPU to the FWC 1

1. Possible Causes

2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
ASM 275501
AMM 27-55-11-000-001	Removal of the Instrumentation Position Pick-Off Unit
AMM 27-55-11-400-001	Installation of the Instrumentation Position Pick-Off Unit
AMM 31-50-00-710-001	Ground Scanning of the Central Warning System
AMM 31-53-34-000-001	Removal of the Flight Warning Computer (FWC)
AMM 31-53-34-400-001	Installation of the Flight Warning Computer (FWC)

3. Fault Confirmation
Subtask 31-53-00-710-208-A

A. Do the operational test of the central warning systems (FWC) AMM 31-50-00-710-001.

4. Fault Isolation
Subtask 31-53-00-810-136-A

A. If the test gives the maintenance message FWC1: RH FLP SYNC 3CNB:

(1) If the fault continues:

(a) If the fault continues:

do a check and repair the wiring from the FWC1 (1WW1) to the flap IPPU (3CN), between pins AD/13F, 13G, 13H and pins B/C, D, E ASM 275501.

Subtask 31-53-00-710-209-A

B. Do the test given in Para. 3.

[Rev.8 from Aug 2018] 2026.04.04 04:30:18 UTC