Loss of the LH FLP SYNC Signal Output of the Flap IPPU to the FWC2
TASK 31-53-00-810-883-A
Loss of the LH FLP SYNC Signal Output of the Flap IPPU to the FWC2
1. Possible Causes
A. Referenced Information
3. Fault Confirmation
Subtask 31-53-00-710-200-A 4. Fault Isolation
Subtask 31-53-00-810-132-A
[Rev.8 from Aug 2018]
2026.04.04 04:30:17 UTC
Loss of the LH FLP SYNC Signal Output of the Flap IPPU to the FWC2
1. Possible Causes
- FWC-2 [1WW2]
- 3CN IPPU-FLAP
wiring from the FWC2 (1WW2) to the flap IPPU (3CN)
A. Referenced Information
| REFERENCE | DESIGNATION |
|---|---|
| ASM 275501 | |
| AMM 27-55-11-000-001 | Removal of the Instrumentation Position Pick-Off Unit |
| AMM 27-55-11-400-001 | Installation of the Instrumentation Position Pick-Off Unit |
| AMM 31-50-00-710-001 | Ground Scanning of the Central Warning System |
| AMM 31-53-34-000-001 | Removal of the Flight Warning Computer (FWC) |
| AMM 31-53-34-400-001 | Installation of the Flight Warning Computer (FWC) |
Subtask 31-53-00-710-200-A 4. Fault Isolation
Subtask 31-53-00-810-132-A
A. If the test gives the maintenance message FWC2: LH FLP SYNC 3CNA:
Subtask 31-53-00-710-201-A - replace the FWC-2 [1WW2] AMM 31-53-34-000-001 and AMM 31-53-34-400-001.
- replace the 3CN IPPU-FLAP AMM 27-55-11-000-001 and AMM 27-55-11-400-001
- do a check and repair the
wiring from the FWC2 (1WW2) to the flap IPPU (3CN) , between pins AA/13B, 13C, 13D and pins A/C, D, E ASM 275501.
B. Do the test given in Para. 3.