Loss of the RH SLT SYNC Signal Output of the Slat IPPU to the FWC 1

TASK 31-53-00-810-881-A
Loss of the RH SLT SYNC Signal Output of the Slat IPPU to the FWC 1

1. Possible Causes

2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
ASM 278501
AMM 27-85-11-000-001	Removal of the Instrumentation Position Pick-Off Unit
AMM 27-85-11-400-001	Installation of the Instrumentation Position Pick-Off Unit
AMM 31-50-00-710-001	Ground Scanning of the Central Warning System
AMM 31-53-34-000-001	Removal of the Flight Warning Computer (FWC)
AMM 31-53-34-400-001	Installation of the Flight Warning Computer (FWC)

3. Fault Confirmation
Subtask 31-53-00-710-196-A

A. Do the operational test of the central warning systems (FWC) AMM 31-50-00-710-001.

4. Fault Isolation
Subtask 31-53-00-810-130-A

A. If the test gives the maintenance message FWC1: RH SLT SYNC 4CNB:

(1) If the fault continues:

(a) If the fault continues:

do a check and repair the wiring from the FWC1 (1WW1) to the slat IPPU (4CN), between pins AD/13A, 13B, 13C and pins B/C, D, E ASM 278501.

Subtask 31-53-00-710-197-A

B. Do the test given in Para. 3.

[Rev.8 from Aug 2018] 2026.04.04 04:30:17 UTC