Internal Failure of the DLRB
TASK 31-38-00-810-811-A
Internal Failure of the DLRB
1. Possible Causes
2. Job Set-up Information
A. Referenced Information
3. Fault Confirmation
Subtask 31-38-00-740-054-B ** ON A/C NOT FOR ALL 4. Fault Isolation
Subtask 31-38-00-810-060-B ** ON A/C NOT FOR ALL
[Rev.8 from Aug 2018]
2026.04.04 04:30:08 UTC
Internal Failure of the DLRB
1. Possible Causes
2. Job Set-up Information
A. Referenced Information
| REFERENCE | DESIGNATION |
|---|---|
| AMM 31-38-00-740-001 | BITE Test of the Data Loading Routing Box (DLRB) |
| ASM 313801 | |
| AMM 31-38-21-000-001 | Removal of the Data Loading Selector |
| AMM 31-38-21-400-001 | Installation of the Data Loading Selector |
| AMM 31-38-34-000-001 | Removal of the Data Loading Routing Box (DLRB) |
| AMM 31-38-34-400-001 | Installation of the Data Loading Routing Box (DLRB) |
Subtask 31-38-00-740-054-B ** ON A/C NOT FOR ALL 4. Fault Isolation
Subtask 31-38-00-810-060-B ** ON A/C NOT FOR ALL
A. If the test gives the message DLRB(102TD)/DLS(101TD):
Subtask 31-38-00-740-055-B ** ON A/C NOT FOR ALL - replace the ROUTING BOX-DATA LOADING [102TD] AMM 31-38-34-000-001 and AMM 31-38-34-400-001.
- Replace the SELECTOR-DATA LOADING [101TD] AMM 31-38-21-000-001 and AMM 31-38-21-400-001.
- Do a check the aircraft wiring between the SELECTOR-DATA LOADING [101TD] and ROUTING BOX-DATA LOADING [102TD] ASM 313801:
pin A/E (101TD) to pin D/3 (102TD).
pin A/A (101TD) to pin D/5 (102TD).
pin A/B (101TD) to pin D/6 (102TD).
pin A/D (101TD) to pin D/4 (102TD).
pin A/J (101TD) to pin D/20 (102TD).
pin A/C (101TD) to pin D/36 (102TD).
pin A/G (101TD) to pin D/21 (102TD).
pin A/K (101TD) to pin D/37 (102TD).
- repair the wiring.
- Do a check and repair the aircraft wiring between the ROUTING BOX-DATA LOADING [102TD] and CFDIU [1TW] ASM 313801:
pin B/3 (102TD) to pin AA/7A (1TW).
pin A/44 (102TD) to pin AB/11K (1TW).
pin B/4 (102TD) to pin AA/9A (1TW).
B. Do the test given in Para. 3.