W DOC AIRBUS | TSM A320F

FDIMU Receives No Data from the EVMU


TASK 31-36-00-810-913-A
FDIMU Receives No Data from the EVMU


1. Possible Causes
  • wiring
  • EVMU [2EV]
  • DMU/FDIU (FDIMU) [10TV]
2. Job Set-up Information
 A. Referenced Information
REFERENCE
DESIGNATION
AMM 31-36-00-740-012
Test of the Flight Data Interface and Management Unit (FDIMU)
AMM 31-36-34-000-002
Removal of the FDIU/DMU (FDIMU)
AMM 31-36-34-400-002
Installation of the FDIU/DMU (FDIMU)
ASM 313701
AMM 77-32-34-710-040
Operational Check of EVMU through CFDS for Advisory Indication on ECAM
3. Fault Confirmation
Subtask 31-36-00-740-196-A ** ON A/C NOT FOR ALL
A. Do the FDIMU (10TV) fault monitoring test (AIDS-part) AMM 31-36-00-740-012.
NOTE: Make sure that the circuit breakers 5TV, 5CC2, 14CC2 on the panel 121VU and 5CC1, 14CC1 on the panel 49VU are closed during the test.
4. Fault Isolation
Subtask 31-36-00-810-126-A ** ON A/C NOT FOR ALL
A. If the test gives the maintenance message:

  • EVMU (2EV) / FDIMU (10TV)

   (1) Do the operational test of the engine vibration monitoring unit with the CFDS AMM 77-32-34-710-040.

     (a) If the test gives a different maintenance message, you can find the related trouble shooting procedure in the applicable Page Block 201.

   (2) If the fault continues:
  • do a check and if necessary repair the wiring between the EVMU [2EV] and the DMU/FDIU (FDIMU) [10TV] ASM 313701:

    EVMU Connector AA/13A to FDIMU Connector AA/2E
    EVMU Connector AA/13C to FDIMU Connector AA/2F

   (3) If the fault continues:
Subtask 31-36-00-740-197-A ** ON A/C NOT FOR ALL
B. Do the test given in Para. 3.
[Rev.8 from Aug 2018] 2026.04.04 04:30:07 UTC