DMU Receives No Data from the BSCU 1 or BSCU 2

TASK 31-36-00-810-890-A
DMU Receives No Data from the BSCU 1 or BSCU 2

1. Possible Causes

wiring
BSCU [10GG]
DMU [1TV]

2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
AMM 31-36-00-710-001	Test of the DMU
AMM 31-36-34-000-001	Removal of the Data Management Unit (DMU)
AMM 31-36-34-400-001	Installation of the Data Management Unit (DMU)
ASM 313701
AMM 32-42-00-710-001	Operational Check of the Normal Braking System

3. Fault Confirmation
Subtask 31-36-00-740-154-A ** ON A/C NOT FOR ALL

A. Do the DMU (1TV) fault monitoring test AMM 31-36-00-710-001.

NOTE: Make sure that the circuit breakers 1TV, 5CC2, 14CC2 on the panel 121VU and 5CC1, 14CC1 on the panel 49VU are closed during the test.

4. Fault Isolation
Subtask 31-36-00-810-104-A ** ON A/C NOT FOR ALL

A. If the test gives the maintenance message:

NO BSCU 1 DATA, or
NO BSCU 2 DATA

(1) Do the operational test of the Normal Braking System AMM 32-42-00-710-001.

(a) If the test gives a different maintenance message, you can find the related trouble shooting procedure in the applicable Page Block 201.

(2) If the fault continues:

do a check and repair the wiring from the BSCU [10GG] to the DMU [1TV] ASM 313701.

(3) If the fault continues:

replace the DMU (1TV) AMM 31-36-34-000-001 and AMM 31-36-34-400-001.

Subtask 31-36-00-740-155-A ** ON A/C NOT FOR ALL

B. Do the test given in Para. 3.

[Rev.8 from Aug 2018] 2026.04.04 04:30:04 UTC