Failure of the Printer

TASK 31-35-00-810-817-A
Failure of the Printer

1. Possible Causes

2. Job Set-up Information
A. Referenced Information

3. Fault Confirmation
Subtask 31-35-00-865-066-A

A. Make sure that this(these) circuit breaker(s) is(are) closed:

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C ALL
121VU	PTR/SPLY	6TW	J21

Subtask 31-35-00-700-050-A

B. Test
Not applicable, the fault is evident.

4. Fault Isolation
Subtask 31-35-00-810-066-A

A. Do a check of the status of the circuit breaker (6TW).
(1) If the circuit breaker (6TW) is closed:

(a) If the fault continues:

do a check of the wiring from printer (4TW) pin A/R to the circuit breaker (6TW) ASM 313501.

1 If there is no continuity:

2 If there is continuity:

a If the fault continues:

do a check and repair the wiring from printer (4TW) pin A/N to the first terminal block.

(2) If the circuit breaker (6TW) is open:

(a) If the circuit breaker trips:

1 If the fault continues:

do a check and repair the wiring from the circuit breaker (6TW) to the printer (4TW).

(b) If the circuit breaker stays closed and if the fault continues:

Subtask 31-35-00-700-051-A

B. After the subsequent flight, make sure that the fault does not continue.

[Rev.8 from Aug 2018] 2026.04.04 04:30:02 UTC