Printing of the ACARS (or ATSU) Data not possible from the MCDU1
TASK 31-35-00-810-812-A
Printing of the ACARS (or ATSU) Data not possible from the MCDU1
1. Possible Causes
2. Job Set-up Information
A. Referenced Information
3. Fault Confirmation
Subtask 31-35-00-865-061-A
Subtask 31-35-00-810-061-A
[Rev.8 from Aug 2018]
2026.04.04 04:30:02 UTC
Printing of the ACARS (or ATSU) Data not possible from the MCDU1
1. Possible Causes
2. Job Set-up Information
A. Referenced Information
| REFERENCE | DESIGNATION |
|---|---|
| AMM 22-82-12-000-001 | Removal of the MCDU |
| AMM 22-82-12-400-002 | Installation of the MCDU |
| ASM 228604 | |
| AMM 23-24-34-000-001 | Removal of the ACARS Management Unit (MU) |
| AMM 23-24-34-400-001 | Installation of the ACARS Management Unit (MU) |
| ASM 313501 | |
| AMM 31-35-22-000-001 | Removal of the Printer |
| AMM 31-35-22-400-001 | Installation of the Printer |
| AMM 46-21-34-000-001 | Removal of the Air Traffic Service Unit (ATSU) |
| AMM 46-21-34-400-001 | Installation of the Air Traffic Service Unit (ATSU) |
Subtask 31-35-00-865-061-A
A. Make sure that this(these) circuit breaker(s) is(are) closed:
Subtask 31-35-00-710-072-A | PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C ALL | |||
| 49VU | AUTO FLT/MCDU/1 | 11CA1 | B01 |
| 121VU | PTR/SPLY | 6TW | J21 |
| 121VU | CFDS/CFDIU/SPLY | 2TW | J18 |
| 121VU | CFDS/CFDIU/BACK/UP | 8TW | J17 |
| 121VU | ATSU 1 | 3TX1 | L16 |
| 121VU | ATSU 1/SWTG | 5TX1 | L15 |
B. On the MCDU1, get the ACARS (or ATSU) page on the MCDU MENU and then push the line key adjacent to the PRINT indication.
4. Fault IsolationSubtask 31-35-00-810-061-A
A. If it is not possible to print the ACARS (or ATSU) data on the printer (4TW):
Subtask 31-35-00-710-073-A - replace the PRINTER [4TW] AMM 31-35-22-000-001 and AMM 31-35-22-400-001.
- replace the
[1RB] AMM 23-24-34-000-001 and AMM 23-24-34-400-001.
- do a check of the wiring from ACARS MU (1RB) pins AB/15E, 15F to printer (4TW) pins A/T, U ASM 313501.
- repair the wiring.
- do a check of the wiring from MCDU1 (3CA1) pins A/27, 28 to ACARS MU (1RB) pins AB/14A, 14B ASM 228604.
- repair the wiring.
- replace the MCDU-1 [3CA1] AMM 22-82-12-000-001 and AMM 22-82-12-400-002.
- replace the ATSU [1TX1] AMM 46-21-34-000-001 and AMM 46-21-34-400-001.
- do a check of the wiring from ATSU (1TX1) pins AA/1E, 1F to printer (4TW) pins A/T, U ASM 313501.
- repair the wiring.
- do a check of the wiring from MCDU1 (3CA1) pins A/27, 28 to ATSU (1TX1) pins AA/7E, 7F ASM 228604.
- repair the wiring.
- replace the MCDU-1 [3CA1] AMM 22-82-12-000-001 and AMM 22-82-12-400-002.
B. Do the action given in Para. 3.B.