W DOC AIRBUS | TSM A320F

Printing of the DMU (or FDIMU) Data not possible from the MCDU2


TASK 31-35-00-810-801-A
Printing of the DMU (or FDIMU) Data not possible from the MCDU2


1. Possible Causes
2. Job Set-up Information
 A. Referenced Information
REFERENCE
DESIGNATION
AMM 22-82-12-000-001
Removal of the MCDU
AMM 22-82-12-400-002
Installation of the MCDU
ASM 228604
ASM 313501
AMM 31-35-22-000-001
Removal of the Printer
AMM 31-35-22-400-001
Installation of the Printer
AMM 31-36-34-000-001
Removal of the Data Management Unit (DMU)
AMM 31-36-34-000-002
Removal of the FDIU/DMU (FDIMU)
AMM 31-36-34-400-001
Installation of the Data Management Unit (DMU)
AMM 31-36-34-400-002
Installation of the FDIU/DMU (FDIMU)
3. Fault Confirmation
Subtask 31-35-00-865-050-A
A. Make sure that this(these) circuit breaker(s) is(are) closed:
PANELDESIGNATIONFINLOCATION
** ON A/C NOT FOR ALL
121VUAIDS/DMU4TVK15
** ON A/C ALL
121VUPTR/SPLY6TWJ21
121VUCFDS/CFDIU/SPLY2TWJ18
121VUCFDS/CFDIU/BACK/UP8TWJ17
121VUAUTO FLT/MCDU/211CA2N20
** ON A/C NOT FOR ALL
121VUAIDS & RCDR/FDIMU5TVK15
Subtask 31-35-00-710-050-A
B. On the MCDU2, get the DMU page on the MCDU MENU and then push the line key adjacent to the PRINT indication.
4. Fault Isolation
Subtask 31-35-00-810-050-A
A. If it is not possible to print the DMU (or FDIMU) data on the printer (4TW):

   (1) If the fault continues (with DMU installed):

     (a) If the fault continues:

  • do a check of the wiring from DMU (1TV) pins AA/11E, 11F to printer (4TW) pins A/C, D ASM 313501.
       1 If there is no continuity:

  • repair the wiring.

       2 If there is continuity:

  • do a check of the wiring from MCDU2 (3CA2) pins A/27, 28 to DMU (1TV) pins AB/11A, 11B ASM 228604.
         a If there is no continuity:

  • repair the wiring.

         b If there is continuity:

   (2) If the fault continues (with FDIMU installed):

     (a) If the fault continues:

  • do a check of the wiring from FDIMU (10TV) pins AA/11E, 11F to printer (4TW) pins A/C, D ASM 313501.
       1 If there is no continuity:

  • repair the wiring.

       2 If there is continuity:

  • do a check of the wiring from MCDU2 (3CA2) pins A/27, 28 to FDIMU (10TV) pins AB/11A, 11B ASM 228604.
         a If there is no continuity:

  • repair the wiring.

         b If there is continuity:

Subtask 31-35-00-710-051-A
B. Do the action given in Para. 3.B.
[Rev.8 from Aug 2018] 2026.04.04 04:30:01 UTC