Loss of the Bus Output from the EIU 2 to the CFDIU

TASK 31-32-00-810-892-A
Loss of the Bus Output from the EIU 2 to the CFDIU

1. Possible Causes

2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
AMM 31-32-00-869-002	Procedure for the Class 3 Fault Reading
ASM 313205
AMM 31-32-34-000-001	Removal of the CFDIU
AMM 31-32-34-400-001	Installation of the CFDIU

3. Fault Confirmation
Subtask 31-32-00-865-138-A

A. Make sure that this(these) circuit breaker(s) is(are) closed:

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C ALL
49VU	ENGINE/2/FADEC A/AND EIU 2	2KS2	A05
121VU	ENGINE/ENG2/FADEC B/AND EIU 2	4KS2	Q40

Subtask 31-32-00-740-228-A

B. Test
On the CFDS MENU page, get access to the AVIONICS STATUS page AMM 31-32-00-869-002.

4. Fault Isolation
Subtask 31-32-00-810-141-A

A. If the test gives the maintenance message NO EIU 2 DATA:

(1) If the fault continues:

do a check and repair the wiring from the CFDIU (1TW) pins AB/13H, 13J to the first terminal block ASM 313205.

Subtask 31-32-00-740-229-A

B. Do the test given in Para. 3.B.

[Rev.8 from Aug 2018] 2026.04.04 04:29:56 UTC