Failure of the CFDIU Detected by the DMC 3
TASK 31-32-00-810-860-A
Failure of the CFDIU Detected by the DMC 3
1. Possible Causes
A. Referenced Information
3. Fault Confirmation
Subtask 31-32-00-865-108-A
Subtask 31-32-00-810-109-A ** ON A/C NOT FOR ALL
[Rev.8 from Aug 2018]
2026.04.04 04:29:53 UTC
Failure of the CFDIU Detected by the DMC 3
1. Possible Causes
- CFDIU [1TW]
- wiring
A. Referenced Information
| REFERENCE | DESIGNATION |
|---|---|
| ASM 313205 | |
| AMM 31-32-34-000-001 | Removal of the CFDIU |
| AMM 31-32-34-400-001 | Installation of the CFDIU |
| AMM 31-60-00-740-002 | Perform Electronic Instrument System (EIS) Input Test |
| AMM 31-60-00-740-007 | GROUND SCANNING Test of the DMC |
Subtask 31-32-00-865-108-A
A. Make sure that this(these) circuit breaker(s) is(are) closed:
Subtask 31-32-00-740-164-A ** ON A/C NOT FOR ALL Subtask 31-32-00-740-164-B ** ON A/C NOT FOR ALL 4. Fault Isolation| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C ALL | |||
| 49VU | EIS/DMC3/STBY/SPLY | 14WT1 | E10 |
| 49VU | EIS/DMC3/SWTG | 21WT3 | E07 |
| 121VU | EIS/DMC3/SPLY | 10WT3 | Q09 |
Subtask 31-32-00-810-109-A ** ON A/C NOT FOR ALL
A. If the test gives the maintenance message DMC3 : NO CFDIU DATA:
Subtask 31-32-00-810-109-B ** ON A/C NOT FOR ALL - replace the CFDIU [1TW] , AMM 31-32-34-000-001 and AMM 31-32-34-400-001.
- do a check and repair the wiring from the CFDIU (1TW) pins AB/11D, 11E to the first terminal block , ASM 313205.
A. If the test gives the maintenance message CFDIU(1TW)/DMC3(1WT1)
Subtask 31-32-00-740-165-A - replace the CFDIU [1TW] , AMM 31-32-34-000-001 and AMM 31-32-34-400-001.
- do a check and repair the wiring from the CFDIU (1TW) pins AB/11D, 11E to the first terminal block , ASM 313205.
B. Do the test given in Para. 3.B.