Loss of the Heating System of the Right Fixed Window
TASK 30-42-00-810-817-A
Loss of the Heating System of the Right Fixed Window
1. Possible Causes
2. Job Set-up Information
A. Referenced Information
3. Fault Confirmation
Subtask 30-42-00-710-082-A
Subtask 30-42-00-810-066-A
[Rev.8 from Aug 2018]
2026.04.04 04:29:42 UTC
Loss of the Heating System of the Right Fixed Window
1. Possible Causes
2. Job Set-up Information
A. Referenced Information
| REFERENCE | DESIGNATION |
|---|---|
| AMM 30-42-00-710-001 | Operational Test of the Windshield Anti-Icing and Defogging |
| AMM 30-42-34-000-001 | Removal of the Window Heat Computer (WHC) |
| AMM 30-42-34-400-001 | Installation of the Window Heat Computer (WHC) |
| AMM 56-11-12-000-001 | Removal of the Fixed Windows |
| AMM 56-11-12-400-002 | Installation of the Fixed Windows |
Subtask 30-42-00-710-082-A
A. Test
(1) Do the operational test of the windshield anti-icing and defogging AMM 30-42-00-710-001.
4. Fault Isolation(1) Do the operational test of the windshield anti-icing and defogging AMM 30-42-00-710-001.
Subtask 30-42-00-810-066-A
A. If the test gives maintenance message R FIXED WINDOW:
(a) Replace WHC-2 [2DG2] , AMM 30-42-34-000-001 and AMM 30-42-34-400-001.
(b) If the fault continues:
Subtask 30-42-00-710-083-A - Disconnect the electrical connector from the R fixed window (7DG2) and do a check of the resistance between pins A and B on the receptacle of the R fixed window (7DG2).
NOTE: For right fixed window P/N SPSA320 series 2 (with 2 sensors),
For right fixed window P/N SPSA320 series 3 (with 3 sensors),
For right fixed window P/N 165313 series,
For right fixed window P/N NH25216 series,
(1) If the resistance is not correct: For right fixed window P/N SPSA320 series 3 (with 3 sensors),
For right fixed window P/N 165313 series,
For right fixed window P/N NH25216 series,
- Replace WINDOW-FIXED, R [7DG2] , AMM 56-11-12-000-001 and AMM 56-11-12-400-002.
(a) Replace WHC-2 [2DG2] , AMM 30-42-34-000-001 and AMM 30-42-34-400-001.
(b) If the fault continues:
- Do a check and repair the
wiring from the WHC 2 (2DG2) to R fixed window (7DG2) pin B/H to pin A/A.
B. Do the operational test given in Para. 3.
R Fixed Window Electrical Connector with 2 sensors