Loss of the SEC 2 BUS Signal for the FCDC 1

TASK 27-95-00-810-808-A
Loss of the SEC 2 BUS Signal for the FCDC 1

1. Possible Causes

2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
ASM 279254
AMM 27-95-34-000-001	Removal of the FCDC
AMM 27-95-34-400-001	Installation of the FCDC
AMM 27-96-00-740-001	BITE Test of the EFCS (Ground Scanning)

3. Fault Confirmation
Subtask 27-95-00-740-058-A

A. Test
(1) Do the BITE test of the EFCS (ground scanning) AMM 27-96-00-740-001.

4. Fault Isolation
Subtask 27-95-00-810-054-A

A. If the BITE test gives the maintenance message:
FCDC1 OR BUS FROM SEC2 COM
or
FCDC1 OR BUS FROM SEC2 MON

(1) If the fault continues:

do a check and repair the wiring of the DGI 2/2 signal from the FCDC1 (3CE1) to the first terminal block ASM 279254 if the maintenance message is FCDC1 OR BUS FROM SEC2 COM
or
do a check and repair the wiring of the DGI 2/4 signal from the FCDC1 (3CE1) to the first terminal block ASM 279254 if the maintenance message is FCDC1 OR BUS FROM SEC2 MON.

Subtask 27-95-00-740-059-A

B. Do the test given in Para. 3.

[Rev.8 from Aug 2018] 2026.04.04 04:28:23 UTC