DOC AIRBUS | TSM A320FFailure of the FCDC1
TASK 27-95-00-810-803-A
Failure of the FCDC1
1. Possible Causes
A. Referenced Information
3. Fault Confirmation
Subtask 27-95-00-740-082-A 4. Fault Isolation
Subtask 27-95-00-810-066-A
[Rev.8 from Aug 2018]
2026.04.04 04:28:23 UTC
Failure of the FCDC1
1. Possible Causes
- FCDC-1 [3CE1]
- wiring of the 28VDC GND signal
wiring of the +28VDC signal
A. Referenced Information
| REFERENCE | DESIGNATION |
|---|---|
| ASM 279207 | |
| AMM 27-95-34-000-001 | Removal of the FCDC |
| AMM 27-95-34-400-001 | Installation of the FCDC |
| AMM 27-96-00-740-001 | BITE Test of the EFCS (Ground Scanning) |
Subtask 27-95-00-740-082-A 4. Fault Isolation
Subtask 27-95-00-810-066-A
A. If the BITE test gives the maintenance message:
FCDC1
(a) Do a check of the wiring of the 28VDC GND signal from the FCDC1 (3CE1) to the ground terminal ASM 279207.
wiring of the +28VDC signal from the FCDC1 (3CE1) to the first terminal block ASM 279207.
Subtask 27-95-00-740-083-A FCDC1
- replace the FCDC-1 [3CE1] AMM 27-95-34-000-001 and AMM 27-95-34-400-001.
(a) Do a check of the wiring of the 28VDC GND signal from the FCDC1 (3CE1) to the ground terminal ASM 279207.
- if there is no continuity repair the above wiring
- if there is continuity see the Para. (b).
B. Do the test given in Para. 3.