Failure of the Roll Side Stick Transducer Unit Potentiometer (New-Generation Side-Stick Unit)

TASK 27-93-00-810-986-A
Failure of the Roll Side Stick Transducer Unit Potentiometer (New-Generation Side-Stick Unit)

NOTE: This task is applicable only for the new-generation side-stick unit.

1. Possible Causes

2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
AMM 27-92-41-000-802	Removal of the New-Generation Side-Stick Unit
AMM 27-92-41-400-802	Installation of the New-Generation Side-Stick Unit
AMM 27-93-34-000-001	Removal of the ELAC
AMM 27-93-34-400-001	Installation of the ELAC

3. Fault Confirmation
Subtask 27-93-00-700-218-A

A. Test
Not applicable, you cannot confirm this fault on the ground.

4. Fault Isolation
Subtask 27-93-00-810-271-A

A. If the post flight report gives the maintenance message:
ELAC1

replace the ELAC-1 [2CE1] AMM 27-93-34-000-001 and AMM 27-93-34-400-001.
during the subsequent flights, if this message is shown again, replace the SSU-CAPT (100CE1) AMM 27-92-41-000-802 AMM 27-92-41-400-802
during the subsequent flights, if this message is shown again, replace the SSU-F/O (100CE2) AMM 27-92-41-000-802 AMM 27-92-41-400-802

[Rev.8 from Aug 2018] 2026.04.04 04:28:11 UTC