Loss of the Roll Signal on the CAPT Side Stick for the ELAC 2 (New-Generation Side-Stick Unit)

TASK 27-93-00-810-972-A
Loss of the Roll Signal on the CAPT Side Stick for the ELAC 2 (New-Generation Side-Stick Unit)

NOTE: This task is applicable only for the new-generation side-stick unit.

1. Possible Causes

SSU-CAPT (100CE1)
ELAC-2 [2CE2]
wiring from the ELAC 2 (2CE2) to the SSU-CAPT (100CE1)

2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
ASM 279212
AMM 27-92-41-000-802	Removal of the New-Generation Side-Stick Unit
AMM 27-92-41-400-802	Installation of the New-Generation Side-Stick Unit
AMM 27-93-34-000-001	Removal of the ELAC
AMM 27-93-34-400-001	Installation of the ELAC
AMM 27-96-00-710-020	Operational Test of the Side Stick Assembly (Activation for the BITE Test)
AMM 27-96-00-740-001	BITE Test of the EFCS (Ground Scanning)

3. Fault Confirmation
Subtask 27-93-00-700-196-A

A. Test
(1) Do the operational test of the side stick unit (activation for the BITE test) AMM 27-96-00-710-020.
(2) Do the BITE test of the EFCS (Ground Scanning) AMM 27-96-00-740-001.

4. Fault Isolation
Subtask 27-93-00-810-252-A

A. If the BITE test gives the maintenance message:
ELAC2 OR INPUT OF CAPT ROLL CTL SSTU 4CE1

replace the SSU-CAPT (100CE1), AMM 27-92-41-000-802 and AMM 27-92-41-400-802.

(1) If the fault continues:

replace the ELAC-2 [2CE2] , AMM 27-93-34-000-001 and AMM 27-93-34-400-001.

(2) If the fault continues:

do a check and repair the wiring from the ELAC 2 (2CE2) to the SSU-CAPT (100CE1) ASM 279212.

Subtask 27-93-00-700-197-A

B. Do the operational test and the BITE test given in Para. 3.

[Rev.8 from Aug 2018] 2026.04.04 04:28:10 UTC