Loss of Pin Programming Inputs Signal for the ELAC2

TASK 27-93-00-810-903-A
Loss of Pin Programming Inputs Signal for the ELAC2

1. Possible Causes

2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
ASM 279240
AMM 27-93-34-000-001	Removal of the ELAC
AMM 27-93-34-400-001	Installation of the ELAC
AMM 27-96-00-740-001	BITE Test of the EFCS (Ground Scanning)

3. Fault Confirmation
Subtask 27-93-00-740-168-A

A. Test
(1) Do the BITE test of the EFCS (ground scanning) AMM 27-96-00-740-001.

4. Fault Isolation
Subtask 27-93-00-810-158-A

A. If the BITE test gives the maintenance message:
ELAC2 SDI INPUTS

(1) If the fault continues:

do a check and repair the wiring of the PIN PROGRAM ELAC2 signal from the ELAC2 (2CE2) COM and MON part to the ground terminal ASM 279240.

5. Close-up
Subtask 27-93-00-740-169-A

A. Do the test given in Para. 3.

[Rev.8 from Aug 2018] 2026.04.04 04:28:05 UTC