Side stick handle oscillations when released from stop (New-Generation Side- Stick Unit)

TASK 27-92-00-810-843-A
Side stick handle oscillations when released from stop (New-Generation Side- Stick Unit)

1. Possible Causes

Pitch Damper of the Side Stick Unit
Roll Damper of the Side Stick Unit
Pitch Damper of the Side Stick Assembly
Roll Damper of the Side Stick Assembly

2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
AMM 27-92-41-000-003	Removal of the Dampers
AMM 27-92-41-000-805	Removal of the Dampers of the New-Generation Side-Stick Unit
AMM 27-92-41-400-003	Installation of the Dampers
AMM 27-92-41-400-805	Installation of the Dampers of the New-Generation Side-Stick Unit
AMM 27-92-41-860-801	Identification of the Side Stick Installed on the Aircraft

3. Fault Confirmation
Subtask 27-92-00-700-059-A

A. Not Applicable

Subtask 27-92-00-860-081-A

B. Side Stick Identification
(1) Do the identification of the side stick installed on the aircraft AMM 27-92-41-860-801.
(a) If a new-generation side-stick unit is installed on the aircraft, do the para. 4.A of Fault Isolation.
(b) If the side stick installed on the aircraft is not a new-generation side-stick, do the para 4.B of Fault Isolation.

4. Fault Isolation
Subtask 27-92-00-810-099-A

A. Replace the Pitch Damper of the Side Stick Unit and/or Roll Damper of the Side Stick Unit related to the crew observation AMM 27-92-41-000-805 and AMM 27-92-41-400-805.

Subtask 27-92-00-810-100-A

B. Replace the Pitch Damper of the Side Stick Assembly and/or Roll Damper of the Side Stick Assembly related to the crew observation AMM 27-92-41-000-003 and AMM 27-92-41-400-003.

[Rev.8 from Aug 2018] 2026.04.04 04:27:55 UTC