W DOC AIRBUS | TSM A320F

Incorrect Position of the Left Spoiler 2

TASK 27-60-00-810-824-A
Incorrect Position of the Left Spoiler 2

1. Possible Causes
  • SEC-3 [1CE3]
  • SERVO CTL-SPLR2, L Y [31CE3]
  • wiring
2. Job Set-up Information
 A. Referenced Information
REFERENCE
DESIGNATION
AMM 27-60-00-866-002
Extension-Retraction of the Spoilers for Maintenance
AMM 27-64-51-000-004
Removal of the Spoiler Servo Control
AMM 27-64-51-400-004
Installation of the Spoiler Servo Control
ASM 279404
AWM 279407
AMM 27-94-34-000-001
Removal of the SEC
AMM 27-94-34-400-001
Installation of the SEC
AMM 27-96-00-710-020
Operational Test of the Side Stick Assembly (Activation for the BITE Test)
AMM 27-96-00-740-001
BITE Test of the EFCS (Ground Scanning)
3. Fault Confirmation
Subtask 27-60-00-700-080-A
A. Test
   (1) Do the operational test of the side stick assembly (activation for BITE test) AMM 27-96-00-710-020.
   (2) Do the BITE test of the EFCS (Ground scanning) AMM 27-96-00-740-001.
4. Fault Isolation
Subtask 27-60-00-810-073-B
A. If the BITE test gives the maintenance message:
L SPLR 2 POS ERROR 31CE3
   (1) Make sure that the maintenance device of the spoiler servocontrol is in the " O " position AMM 27-60-00-866-002.
   (2) If the fault continues
   (3) If the fault continues:
   (4) If the fault continues:
     (a) Do a check of the wiring of the ANI 2-6 signal from the SEC 3 (1CE3) MON part to COM part, ASM 279404, AWM 279407
  • if the wiring is correct, do the Para. (b)
  • if the wiring is not correct, repair it.
     (b) Do a check of the wiring of the ANI 2-6 signal from the SEC 3 (1CE3) MON part to the servocontrol (31CE3), ASM 279404, AWM 279407
  • if the wiring is correct, do the Para. (c)
  • if the wiring is not correct, repair it.
     (c) Do a check and repair the wiring of the POS XDCR SPLY signal from the servocontrol (31CE3) to the SEC 3 (1CE3), ASM 279404, AWM 279407.
Subtask 27-60-00-700-081-A
B. Do the tests given in Para. 3.
[Rev.8 from Aug 2018] 2026.04.04 04:27:44 UTC
"WTRUIB" 2025