W DOC AIRBUS | TSM A320F

Failure of the Right Spoiler 2 Position Transducer

TASK 27-60-00-810-821-A
Failure of the Right Spoiler 2 Position Transducer

1. Possible Causes
  • SERVO CTL-SPLR2, R Y [31CE4]
  • wiring of the POS XDCR SPLY signal from the servo control (31CE4) to the first terminal block
  • wiring of the POS XDCR V1, V2 signals from the servo control (31CE4) to the first terminal block
2. Job Set-up Information
 A. Referenced Information
REFERENCE
DESIGNATION
TSM TASK 27-90-00-810-806-A
Loss of the ACS2 Signal of the SEC3 MON Side
AMM 27-64-51-000-004
Removal of the Spoiler Servo Control
AMM 27-64-51-400-004
Installation of the Spoiler Servo Control
ASM 279404
AMM 27-96-00-710-020
Operational Test of the Side Stick Assembly (Activation for the BITE Test)
AMM 27-96-00-740-001
BITE Test of the EFCS (Ground Scanning)
3. Fault Confirmation
Subtask 27-60-00-700-074-A
A. Test
   (1) Do the operational test of the side stick assembly (activation for BITE test) AMM 27-96-00-710-020.
   (2) Do the BITE test of the EFCS (Ground scanning) AMM 27-96-00-740-001.
     (a) If the ground scanning gives the maintenance message:
R SPLR 2 POS XDCR 31CE4
  • refer to the Para. Fault Isolation.
     (b) If the ground scanning gives the maintenance messages:
R SPLR 2 POS XDCR 31CE4
L SPLR 2 POS XDCR 31CE3
4. Fault Isolation
Subtask 27-60-00-810-070-B
A. If the BITE test gives the maintenance message:
R SPLR 2 POS XDCR 31CE4
NOTE: The resistance of primary and secondary windings must be between 30 ohms and 500 ohms.
   (1) If the fault continues:
  • do a check and repair the wiring of the POS XDCR SPLY signal from the servo control (31CE4) to the first terminal block, ASM 279404.
   (2) If the fault continues:
  • do a check and repair the wiring of the POS XDCR V1, V2 signals from the servo control (31CE4) to the first terminal block, ASM 279404.
Subtask 27-60-00-700-075-A
B. Do the tests given in Para. 3.
[Rev.8 from Aug 2018] 2026.04.04 04:27:43 UTC
"WTRUIB" 2025