Loss of the Left Green Elevator-Servocontrol Mode-Transducer by the SEC 1
TASK 27-30-00-810-821-A
Loss of the Left Green Elevator-Servocontrol Mode-Transducer by the SEC 1
1. Possible Causes
A. Referenced Information
3. Fault Confirmation
Subtask 27-30-00-700-082-A
Subtask 27-30-00-810-066-A
[Rev.8 from Aug 2018]
2026.04.04 04:27:32 UTC
Loss of the Left Green Elevator-Servocontrol Mode-Transducer by the SEC 1
1. Possible Causes
- SEC-1 [1CE1]
wiring of the L G SERVO CTL MODE POS (ANI 7-1) from SEC 1 (1CE1) MON part to the first terminal block
A. Referenced Information
| REFERENCE | DESIGNATION |
|---|---|
| TSM TASK 27-90-00-810-818-A | Loss of the ACS1 Signal of the SEC1 MON Side |
| ASM 279407 | |
| AMM 27-94-34-000-001 | Removal of the SEC |
| AMM 27-94-34-400-001 | Installation of the SEC |
| AMM 27-96-00-710-020 | Operational Test of the Side Stick Assembly (Activation for the BITE Test) |
| AMM 27-96-00-740-001 | BITE Test of the EFCS (Ground Scanning) |
Subtask 27-30-00-700-082-A
A. Test
(1) Do the operational test of the side stick assembly (Activation for the BITE test) AMM 27-96-00-710-020.
(a) If the ground scanning gives the maintenance message:
SEC1 OR WIRING FROM L G ELEV MODE XDCR 34CE1
SEC1 OR WIRING FROM L ELEV POS MON XDCR
SEC1 OR WIRING FROM R ELEV POS MON XDCR
SEC1 MON OR WIRING FROM THS ACTR XDCR2 9CE
SEC1 OR WIRING FROM L G ELEV MODE XDCR 34CE1
SEC1 OR WIRING FROM R Y ELEV MODE XDCR 34CE2
4. Fault Isolation(1) Do the operational test of the side stick assembly (Activation for the BITE test) AMM 27-96-00-710-020.
NOTE: Before you start the operational test procedure, release the FLT CTL/ELAC 1, FLT CTL/ELAC 2 and FLT CTL/SEC 2 pushbutton switches (on these pushbutton switches the OFF legends come on).
(2) Do the BITE test of the EFCS (ground scanning) AMM 27-96-00-740-001. (a) If the ground scanning gives the maintenance message:
SEC1 OR WIRING FROM L G ELEV MODE XDCR 34CE1
- refer to Para. Fault Isolation.
SEC1 OR WIRING FROM L ELEV POS MON XDCR
SEC1 OR WIRING FROM R ELEV POS MON XDCR
SEC1 MON OR WIRING FROM THS ACTR XDCR2 9CE
SEC1 OR WIRING FROM L G ELEV MODE XDCR 34CE1
SEC1 OR WIRING FROM R Y ELEV MODE XDCR 34CE2
- do this trouble shooting procedure (Ref. TSM TASK 27-90-00-810-818).
Subtask 27-30-00-810-066-A
A. If the test gives the maintenance message:
SEC1 OR WIRING FROM L G ELEV MODE XDCR 34CE1
Subtask 27-30-00-700-083-A SEC1 OR WIRING FROM L G ELEV MODE XDCR 34CE1
- Replace the SEC-1 [1CE1] AMM 27-94-34-000-001 and AMM 27-94-34-400-001.
- Do a check and repair the
wiring of the L G SERVO CTL MODE POS (ANI 7-1) from SEC 1 (1CE1) MON part to the first terminal block ASM 279407.
B. Do the tests given in Para. 3.