Operational Test of the Damping Measurement (Aileron) not OK

TASK 27-10-00-810-838-A
Operational Test of the Damping Measurement (Aileron) not OK

1. Possible Causes

2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
AMM 27-14-51-000-001	Removal of the Aileron Servo Control
AMM 27-14-51-400-001	Installation of the Aileron Servo Control
AMM 27-96-00-710-007	Operational Test of the Damping Measurement (Aileron)

3. Fault Confirmation
Subtask 27-10-00-710-054-A

A. Test
Do the operational test of the damping measurement (aileron) AMM 27-96-00-710-007.

4. Fault Isolation
Subtask 27-10-00-810-089-A

A. If the damping factor in the down or in the up position is less than 0,60:

replace the related aileron servocontrol (33CE1 or 33CE2 or 33CE3 or 33CE4) AMM 27-14-51-000-001 and AMM 27-14-51-400-001 .

Subtask 27-10-00-710-055-A

B. Do the test given in Para. 3.A.

[Rev.8 from Aug 2018] 2026.04.04 04:27:28 UTC