CAM related Fault - Mandatory CAM in use

TASK 26-17-00-810-828-A
CAM related Fault - Mandatory CAM in use

1. Possible Causes

2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
AMM 23-73-19-960-001	Replacement of the Cabin Assignment Module
AMM 26-10-00-740-802	Ground Scanning of the Cabin Intercommunication Data-System (CIDS) - Smoke Detection Function (SDF)

3. Fault Confirmation
Subtask 26-17-00-710-104-A ** ON A/C NOT FOR ALL

A. Test
(1) Do the ground scanning of the Cabin Intercommunication Data System (CIDS) - Smoke Detection Function (SDF) AMM 26-10-00-740-802.

Subtask 26-17-00-710-104-B ** ON A/C NOT FOR ALL

A. Test
(1) Do the ground scanning of the Cabin Intercommunication Data System (CIDS) - Smoke Detection Function (SDF) AMM 26-10-00-740-802.

4. Fault Isolation
Subtask 26-17-00-810-145-A ** ON A/C NOT FOR ALL

A. If the test gives a maintenance message which is different from the maintenance message given in step B:

Subtask 26-17-00-810-146-A ** ON A/C NOT FOR ALL

B. If the test gives the maintenance message

(1) Install the related MODULE-CABIN ASSIGNMENT [115RH] AMM 23-73-19-960-001.

Subtask 26-17-00-710-105-A ** ON A/C NOT FOR ALL

C. Test
(1) Do the test given in Para. 3.

Subtask 26-17-00-810-145-B ** ON A/C NOT FOR ALL

D. If the test gives a maintenance message which is different from the maintenance message given in step B:

Subtask 26-17-00-810-146-B ** ON A/C NOT FOR ALL

E. If the test gives the maintenance message

(1) Install the related MODULE-CABIN ASSIGNMENT [115RH] AMM 23-73-19-960-001.

Subtask 26-17-00-710-105-B ** ON A/C NOT FOR ALL

F. Test
(1) Do the test given in Para. 3.

5. Close-up
Subtask 26-17-00-860-076-A ** ON A/C NOT FOR ALL

A. Close Access
(1) Put the aircraft back to its initial configuration.

Subtask 26-17-00-860-076-B ** ON A/C NOT FOR ALL

A. Close Access
(1) Put the aircraft back to its initial configuration.

[Rev.8 from Aug 2018] 2026.04.04 04:27:22 UTC