W DOC AIRBUS | TSM A320F

Floor Lighting on the Cockpit Seats Inoperative


TASK 25-11-00-810-816-A
Floor Lighting on the Cockpit Seats Inoperative


1. Possible Causes
  • SEAT-CAPTAIN [3MS]
  • SW-CONSOLE/FLOOR (15LE)
  • wiring from the Captain seat (3MS) to the switch (15LE)
  • wiring from the Captain Seat (3MS) to the ground
  • SEAT-F/O [4MS]
  • SW-CONSOLE/FLOOR (16LE)
  • wiring from the F/O seat (4MS) to the switch (16LE)
  • wiring from the F/O seat (4MS) to the ground
2. Job Set-up Information
 A. Referenced Information
REFERENCE
DESIGNATION
ASM 251101
AMM 25-11-51-000-001
Removal of the Captain/First Officer Seat
AMM 25-11-51-400-001
Installation of the Captain/First Officer Seat
AMM 33-12-00-710-001
Operational Test of the General Illumination
ASM 331201
3. Fault Confirmation
Subtask 25-11-00-710-063-A
A. Test
   (1) Do the operational test of the general illumination AMM 33-12-00-710-001.
NOTE: Do the test of the console and the briefcase lights only.
4. Fault Isolation
Subtask 25-11-00-810-065-A
A. If during the operational test:
   (1) A bulb is inoperative:
  • replace the bulb.
   (2) The Captain floor lighting is inoperative:
  • disconnect the plug 1197VC and make sure that there is 28VDC at pins F and G ASM 251101.
     (a) If there is 28VDC at pins F and G:
     (b) If there is no 28VDC at pin F:
  • replace the SW-CONSOLE/FLOOR (15LE).
       1 If the fault continues:
  • do a check and repair the wiring from the Captain seat (3MS) to the switch (15LE) pins 1B, 1C, 2C and 3B ASM 331201.
     (c) If there is no ground at pin G:
  • do a check and repair the wiring from the Captain Seat (3MS) to the ground ASM 331201.
   (3) The First Officer floor lighting is inoperative:
  • disconnect the plug 1198VC and make sure that there is 28VDC at pins F and G.
     (a) If there is 28VDC at pins F and G:
     (b) If there is no 28VDC at pin F:
  • replace the SW-CONSOLE/FLOOR (16LE).
       1 If the fault continues:
  • do a check and repair the wiring from the F/O seat (4MS) to the switch (16LE) pins 1B, 1C, 2C and 3B ASM 331201.
     (c) If there is no ground at pin G:
  • do a check and repair the wiring from the F/O seat (4MS) to the ground ASM 331201.
Subtask 25-11-00-710-064-A
B. Do the test given in Para. 3.
[Rev.8 from Aug 2018] 2026.04.04 04:27:00 UTC