W DOC AIRBUS | TSM A320F

Too High Oil Level of the IDG1


TASK 24-21-00-810-813-A
Too High Oil Level of the IDG1


1. Possible Causes
  • IDG1 OIL COOLER
2. Job Set-up Information
 A. Referenced Information
REFERENCE
DESIGNATION
AMM 12-13-24-612-041
IDG Servicing - Filling of the IDG with Oil or Addition of Oil after a level Check
AMM 12-13-24-612-803
IDG Servicing - Filling of the IDG with Oil or Addition of Oil after a Level Check
AMM 24-21-00-210-044
Inspection of the Filter Element(s)
AMM 24-21-00-210-807
Inspection of the IDG Oil Charge and Scavenge Filter Elements
AMM 24-21-00-612-043
Servicing of the IDG after Oil Chemical Contamination
AMM 24-21-00-612-804
Servicing of the IDG after Oil Chemical Contamination
AMM 24-21-42-000-802
Removal of the IDG Fuel/Oil Heat-Exchanger
AMM 24-21-42-400-802
Installation of the IDG Fuel/Oil Heat-Exchanger
AMM 73-11-60-000-001
Removal of the Integrated Drive Generator (IDG) Oil Cooler Assembly
AMM 73-11-60-000-002
Removal of the Integrated Drive Generator (IDG) Oil Cooler Assembly
AMM 73-11-60-400-001
Installation of the Integrated Drive Generator (IDG) Oil Cooler Assembly
AMM 73-11-60-400-002
Installation of the Integrated Drive Generator (IDG) Oil Cooler Assembly
3. Fault Confirmation
Subtask 24-21-00-710-070-A
A. Test
   (1) Not applicable, the fault is evident.
4. Fault Isolation
Subtask 24-21-00-810-062-A ** ON A/C NOT FOR ALL
A. Do the inspection of the filter AMM 24-21-00-210-044.
   (1) If during this inspection, you smell a fuel odour from the filter element or filter cover:
   (2) If the inspection shows nothing incorrect:
Subtask 24-21-00-810-062-C ** ON A/C NOT FOR ALL
A. Do the inspection of the filter(s) AMM 24-21-00-210-044.
   (1) If during this inspection, you smell a fuel odour from the filter element(s) or filter cover(s):
   (2) If the inspection shows nothing incorrect:
Subtask 24-21-00-810-062-D ** ON A/C NOT FOR ALL
A. Do the inspection of the filter(s) AMM 24-21-00-210-807.
   (1) If during this inspection, you smell a fuel odour from the filter element(s) or filter cover(s):
   (2) If the inspection shows nothing incorrect:
[Rev.8 from Aug 2018] 2026.04.04 04:26:30 UTC