DOC AIRBUS | TSM A320FCAM - Director software mismatch
TASK 23-73-00-810-935-A
CAM - Director software mismatch
1. Possible Causes
2. Job Set-up Information
A. Referenced Information
3. Fault Confirmation
Subtask 23-73-00-710-359-A ** ON A/C NOT FOR ALL 4. Fault Isolation
Subtask 23-73-00-810-694-A ** ON A/C NOT FOR ALL
Subtask 23-73-00-710-360-A ** ON A/C NOT FOR ALL
[Rev.8 from Aug 2018]
2026.04.04 04:25:59 UTC
CAM - Director software mismatch
1. Possible Causes
2. Job Set-up Information
A. Referenced Information
| REFERENCE | DESIGNATION |
|---|---|
| AMM 23-73-00-740-005 | BITE-Test of the Cabin Intercommunication Data System (CIDS) through the CFDS |
Subtask 23-73-00-710-359-A ** ON A/C NOT FOR ALL 4. Fault Isolation
Subtask 23-73-00-810-694-A ** ON A/C NOT FOR ALL
A. If the test gives a different maintenance message, do the trouble shooting procedure related to the maintenance message.
Subtask 23-73-00-810-695-A ** ON A/C NOT FOR ALL B. If the test confirms the fault:
5. Close-up- make sure that a correct OBRM (116 RH) and/or CAM (115RH) is installed.
NOTE: The OBRM standart must be in accordance with the standart from the CAM.
Subtask 23-73-00-710-360-A ** ON A/C NOT FOR ALL
A. Do the test as given in Para. 3.A.