PA - No audio signals from one or two loudspeakers in series
TASK 23-73-00-810-872-A
PA - No audio signals from one or two loudspeakers in series
1. Possible Causes
A. Referenced Information
3. Fault Confirmation
Subtask 23-73-00-710-186-A ** ON A/C NOT FOR ALL
Subtask 23-73-00-810-486-A
[Rev.8 from Aug 2018]
2026.04.04 04:25:54 UTC
PA - No audio signals from one or two loudspeakers in series
1. Possible Causes
- loudspeakers
DEU-A (200RHxx) - wiring
- PISA 602RHxx
A. Referenced Information
| REFERENCE | DESIGNATION |
|---|---|
| AMM 23-73-00-710-036 | Operational Test of the Loudspeaker through the MCDU |
| AMM 23-73-00-740-005 | BITE-Test of the Cabin Intercommunication Data System (CIDS) through the CFDS |
| ASM 237313 | |
| ASM 237314 | |
| ASM 237315 | |
| ASM 237316 | |
| AMM 23-73-41-000-001 | Removal of the Passenger Interface and Supply Adapter (602RH) |
| AMM 23-73-41-400-001 | Installation of the Passenger Interface and Supply Adapter (602RH) |
| AMM 23-73-46-000-001 | Removal of the Decoder/Encoder Unit A (200RH) |
| AMM 23-73-46-400-001 | Installation of the Decoder/Encoder Unit A (200RH) |
| AMM 23-73-51-000-001 | Removal of the Loudspeaker |
| AMM 23-73-51-400-002 | Installation of the Loudspeaker |
Subtask 23-73-00-710-186-A ** ON A/C NOT FOR ALL
A. Test
(1) Do the CIDS BITE test through the CFDS AMM 23-73-00-740-005.
(2) Do the CIDS1 LOUDSPEAKER test through the CFDS.
Subtask 23-73-00-710-186-B ** ON A/C NOT FOR ALL (1) Do the CIDS BITE test through the CFDS AMM 23-73-00-740-005.
(2) Do the CIDS1 LOUDSPEAKER test through the CFDS.
A. Test
(1) Do the CIDS Interface and Power-Up Test via the CFDS AMM 23-73-00-740-005.
(2) Do the CIDS LOUDSPEAKER test via the CFDS AMM 23-73-00-710-036.
4. Fault Isolation(1) Do the CIDS Interface and Power-Up Test via the CFDS AMM 23-73-00-740-005.
(2) Do the CIDS LOUDSPEAKER test via the CFDS AMM 23-73-00-710-036.
Subtask 23-73-00-810-486-A
A. If the test gives a different maintenance message, do the trouble shooting procedure related to the maintenance message.
Subtask 23-73-00-810-487-A ** ON A/C NOT FOR ALL B. If there is no maintenance message, but there is a fault in one or two loudspeakers in series:
Subtask 23-73-00-810-487-B ** ON A/C NOT FOR ALL - replace the related loudspeakers AMM 23-73-51-000-001 and AMM 23-73-51-400-002.
- replace the related
DEU-A (200RHxx) AMM 23-73-46-000-001 and AMM 23-73-46-400-001.
- do a check and repair the wiring between the:
DEU-A 200RHxx connector C/5 and loudspeaker,
DEU-A 200RHxx connector C/6 and loudspeaker,
or
DEU-A 200RHxx connector C/3 and loudspeaker,
DEU-A 200RHxx connector C/4 and loudspeaker,
or
DEU-A 200RHxx connector C/1 and loudspeaker,
DEU-A 200RHxx connector C/2 and loudspeaker ASM 237313, ASM 237314, ASM 237315 and ASM 237316.
B. If the fault continues:
For a DEU-A connected Loudspeaker:
Subtask 23-73-00-710-187-A - replace the related loudspeakers AMM 23-73-51-000-001 and AMM 23-73-51-400-002.
For a DEU-A connected Loudspeaker:
- replace the related
DEU-A (200RHxx) AMM 23-73-46-000-001 and AMM 23-73-46-400-001.
- do a check and repair the wiring between the related:
DEU-A 200RHxx connector with the signal name LS Hi and the related loudspeaker,
DEU-A 200RHxx connector with the signal name LS Lo and the related loudspeaker,
ASM 237313, ASM 237314, ASM 237315 and ASM 237316.
- replace the related PISA 602RHxx AMM 23-73-41-000-001 and AMM 23-73-41-400-001.
- do a check and repair the wiring between the related:
PISA 602RHxx connector with the signal name AUDIO_P and the related loudspeaker,
PISA 602RHxx connector with the signal name AUDIO_N and the related loudspeaker,
C. Do the test given in 3.A.