W DOC AIRBUS | TSM A320F

Failure of the Circuit of the Rudder Trim-Control Switch of the FAC 2


TASK 22-62-00-810-802-A
Failure of the Circuit of the Rudder Trim-Control Switch of the FAC 2


1. Possible Causes
  • FAC-2 [1CC2]
  • CTL SW-RUDDER TRIM [9CC]
  • wiring of the RUD TR R NC SW COM and RUD TR L NC SW COM discretes from the FAC 2 (1CC2) to the rudder trim-control switch (9CC)
  • wiring of the RUD TR R NO SW MON or RUD TR L NO SW MON discretes from the FAC 2 (1CC2) to the rudder trim-control switch (9CC)
  • wiring of the ground signal at the rudder trim-control switch (9CC)
2. Job Set-up Information
 A. Referenced Information
REFERENCE
DESIGNATION
AMM 22-66-34-000-002
Removal of the FAC
AMM 22-66-34-400-002
Installation of the FAC
ASM 226803
AMM 22-96-00-710-001
Operational Test of the AFS
3. Fault Confirmation
Subtask 22-62-00-710-052-A
A. Test
   (1) Do the operational test of the AFS without rudder trim-control switch (9CC) operation AMM 22-96-00-710-001 and read the result for the FAC 2.
   (2) Do the operational test of the AFS (turn the rudder trim-control switch (9CC) in one direction) AMM 22-96-00-710-001 and read the result for the FAC 2.
4. Fault Isolation
Subtask 22-62-00-810-053-A
A. If the first test only gives the maintenance message AFS: FAC2/RT CTRL SW 9CC:
   (1) If the fault continues:
  • replace the CTL SW-RUDDER TRIM [9CC] .
   (2) If the fault continues:
  • do a check and repair the wiring of the RUD TR R NC SW COM and RUD TR L NC SW COM discretes from the FAC 2 (1CC2) to the rudder trim-control switch (9CC), ASM 226803.
Subtask 22-62-00-810-054-A
B. If the second test only gives the maintenance message AFS: FAC2/RT CTRL SW 9CC:
   (1) If the fault continues:
  • replace the CTL SW-RUDDER TRIM [9CC] .
   (2) If the fault continues:
  • do a check and repair the wiring of the RUD TR R NO SW MON or RUD TR L NO SW MON discretes from the FAC 2 (1CC2) to the rudder trim-control switch (9CC), ASM 226803.
Subtask 22-62-00-810-055-A
C. If the two tests give the maintenance message AFS: FAC2/RT CTRL SW 9CC:
  • do a check and repair the wiring of the ground signal at the rudder trim-control switch (9CC) pin 8 ASM 226803.
Subtask 22-62-00-710-053-A
D. Do the tests given in Para. 3.
[Rev.8 from Aug 2018] 2026.04.04 04:25:11 UTC