Pack 2 Inlet Pressure Sensor Fault
TASK 21-51-00-810-821-A
Pack 2 Inlet Pressure Sensor Fault
1. Possible Causes
2. Job Set-up Information
A. Referenced Information
3. Fault Confirmation
Subtask 21-51-00-710-082-A ** ON A/C NOT FOR ALL 4. Fault Isolation
Subtask 21-51-00-810-095-B ** ON A/C NOT FOR ALL
[Rev.8 from Aug 2018]
2026.04.04 04:24:49 UTC
Pack 2 Inlet Pressure Sensor Fault
1. Possible Causes
2. Job Set-up Information
A. Referenced Information
| REFERENCE | DESIGNATION |
|---|---|
| AMM 21-51-13-000-001 | Removal of the Pack-Inlet Pressure Sensor |
| AMM 21-51-13-400-001 | Installation of the Pack-Inlet Pressure Sensor |
| AMM 21-61-00-710-001 | Operational Test of the Pack Temperature-Control System |
| ASM 216102 | |
| AMM 21-61-34-000-002 | Removal of the Air-Conditioning System Controller |
| AMM 21-61-34-400-002 | Installation of the Air-Conditioning System Controller |
Subtask 21-51-00-710-082-A ** ON A/C NOT FOR ALL 4. Fault Isolation
Subtask 21-51-00-810-095-B ** ON A/C NOT FOR ALL
A. If the test gives the maintenance message,
P2 PRESS INL SENS(24HB1):
Subtask 21-51-00-720-056-A ** ON A/C NOT FOR ALL P2 PRESS INL SENS(24HB1):
- replace the SENSOR-PRESS, PACK 2 INLET [24HB1] AMM 21-51-13-000-001 and AMM 21-51-13-400-001.
- replace the CONT-AIR COND SYSTEM 2 [57HH] AMM 21-61-34-000-002 and AMM 21-61-34-400-002.
- do a check and repair the wiring ASM 216102 from:
- the PRESSURE SENSOR (24HB1) to the ACSC2 (57HH).
B. Do the test as given in the Para. 3.A.