Check of the Starter Valve Manual Handle Position after Engine Start [CFMB]

TASK 80-11-00-040-044-A
Check of the Starter Valve Manual Handle Position after Engine Start

FIN: 1000EM1 ** ON A/C NOT FOR ALL
FIN: 1000EM2 ** ON A/C NOT FOR ALL

1. Reason for the Job
MMEL 80-07-01A
START VALVE POSITION INDICATION ON THE ENGINE SD PAGE
2. Job Set-up Information
A. Work Zones and Access Panels

B. Referenced Information

REFERENCE	DESIGNATION
Starter Valve Access Panel

3. Job Set-up
Subtask 80-11-00-010-050-A ** ON A/C NOT FOR ALL

A. Open the access door on fan cowl :
(1) FOR [1000EM1] (ENGINE-1)
438CR
(2) FOR [1000EM2] (ENGINE-2)
448CR

4. Procedure
Subtask 80-11-00-210-050-A ** ON A/C NOT FOR ALL

A. After engine start cycle check on starter valve that the manual handle is in closed position.

5. Close-up
Subtask 80-11-00-410-050-A ** ON A/C NOT FOR ALL

A. Close the access door on fan cowl
(1) FOR [1000EM1] (ENGINE-1)
438CR
(2) FOR [1000EM2] (ENGINE-2)
448CR

Subtask 80-11-00-941-050-A ** ON A/C NOT FOR ALL

B. Safety Precautions
(1) Tell the crew to make an entry in the log book.

[Rev.10 from 2021] 2026.04.01 13:15:16 UTC