Discard LP Stub Shaft [IAE]

TASK 72-32-51-920-010-A
Discard LP Stub Shaft

1. Reason for the Job
Refer to the MPD TASK: 726000-I2
DISCARD LP STUB SHAFT

2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
TASK 71-00-20-000-040-A	Removal of the Power Plant
TASK 71-00-20-000-040-A-01	Removal of the Power Plant with the Engine Positioner TWW 75E (MIAG)
TASK 71-00-20-400-040-A	Installation of the Power Plant
TASK 71-00-20-400-040-A-01	Installation of the Power Plant with the Engine Positioner TWW 75E (MIAG)
EM 723200

3. Job Set-up
Subtask 72-32-51-010-050-A ** ON A/C NOT FOR ALL

A. Remove the engine (Ref. AMM TASK 71-00-20-000-040).

4. Procedure
Subtask 72-32-51-020-050-A ** ON A/C NOT FOR ALL

A. Remove and discard Low Pressure stub shaft EM 723200.

Subtask 72-32-51-420-050-A ** ON A/C NOT FOR ALL

B. Install a new LP stub shaft EM 723200.

5. Close-up
Subtask 72-32-51-410-050-A ** ON A/C NOT FOR ALL

A. Install the engine (Ref. AMM TASK 71-00-20-400-040).

[Rev.10 from 2021] 2026.04.01 02:45:19 UTC