DOC AIRBUS | AMM A320FOpen the Fan Cowl Oil Filler Access Door [IAE]
TASK 71-13-14-010-801-A
Open the Fan Cowl Oil Filler Access Door
1. Reason for the Job
This procedure supplies the information to open the oil filler access door.
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Referenced Information
3. Job Set-up
Subtask 71-13-14-941-056-A ** ON A/C NOT FOR ALL
Subtask 71-13-14-010-057-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.01 02:29:38 UTC
Open the Fan Cowl Oil Filler Access Door
1. Reason for the Job
This procedure supplies the information to open the oil filler access door.
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | 1 | SCREWDRIVER - SMALL |
| No specific | AR | WARNING NOTICE(S) |
| REFERENCE | DESIGNATION |
|---|---|
Oil Filler Access DoorSubtask 71-13-14-941-056-A ** ON A/C NOT FOR ALL
A. Safety Precautions
(1) On the center pedestal, on ENG panel 115VU:
(a) Put a WARNING NOTICE(S) in position to tell persons not to start the engine.
(2) Make sure that the engine 1(2) shutdown occurred not less than five minutes before you do this procedure.
(3) On the overhead maintenance panel 50VU:
(a) Make sure that the ON legend of the ENG/FADEC GND PWR/1(2) pushbutton switch is off.
(b) Put a WARNING NOTICE(S) in position to tell persons not to energize the FADEC 1(2).
4. Procedure(1) On the center pedestal, on ENG panel 115VU:
(a) Put a WARNING NOTICE(S) in position to tell persons not to start the engine.
(2) Make sure that the engine 1(2) shutdown occurred not less than five minutes before you do this procedure.
(3) On the overhead maintenance panel 50VU:
(a) Make sure that the ON legend of the ENG/FADEC GND PWR/1(2) pushbutton switch is off.
(b) Put a WARNING NOTICE(S) in position to tell persons not to energize the FADEC 1(2).
Subtask 71-13-14-010-057-A ** ON A/C NOT FOR ALL
A. Open the Oil Filler Door
PRE SB71-0321
(1) Push each latch handle (1) to release the oil filler access door (2) from the fan cowl door.
(2) Pull open the oil filler door.
END OF PRE SB71-0321
POST SB71-0321
(3) Insert a SCREWDRIVER - SMALL in the slot of the latch handle (1) on the oil filler door (2) and use sufficient force to open each latch.
(4) Pull open the oil filler door.
END of POST SB71-0321
PRE SB71-0321
(1) Push each latch handle (1) to release the oil filler access door (2) from the fan cowl door.
(2) Pull open the oil filler door.
END OF PRE SB71-0321
POST SB71-0321
(3) Insert a SCREWDRIVER - SMALL in the slot of the latch handle (1) on the oil filler door (2) and use sufficient force to open each latch.
(4) Pull open the oil filler door.
END of POST SB71-0321