Removal of the Air Intake Thermal Anti-Ice (T.A.I) Access Panel [IAE]

TASK 71-11-11-000-802-A
Removal of the Air Intake Thermal Anti-Ice (T.A.I) Access Panel

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE
No specific	AR	WARNING NOTICE(S)

B. Referenced Information

REFERENCE	DESIGNATION
Thermal Anti-Ice Access Panel

3. Job Set-up
Subtask 71-11-11-860-053-A ** ON A/C NOT FOR ALL

A. Aircraft Maintenance Configuration
(1) On the center pedestal, on ENG panel 115VU:
(a) Put a WARNING NOTICE(S) in position to tell persons not to start the engine.
(2) Make sure that the engine 1(2) shutdown occurred not less than five minutes before you do this procedure.
(3) On overhead maintenance panel 50VU:
(a) Make sure that the ON legend of the ENG/FADEC GND PWR/1(2) pushbutton switch is off.
(b) Put a WARNING NOTICE(S) to tell persons not to energize the FADEC 1(2).
(4) Put the ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE is in position.

4. Procedure
Subtask 71-11-11-020-055-A ** ON A/C NOT FOR ALL

A. Removal of the T.A.I Access Panel

Thermal Anti-Ice Access Panel ** ON A/C NOT FOR ALL

(1) Remove the bolts (2) from the T.A.I access panel (1) on the air intake cowl.
(2) Remove the T.A.I access panel (1) from the air intake cowl.

[Rev.10 from 2021] 2026.04.01 02:28:50 UTC