DOC AIRBUS | AMM A320FFlange Identification [CFML]
TASK 70-40-00-910-803-A
Flange Identification
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Referenced Information
3. Job Set-up
Subtask 70-40-00-860-050-A
Subtask 70-40-00-910-053-A
[Rev.10 from 2021]
2026.04.01 02:21:03 UTC
Flange Identification
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Referenced Information
| REFERENCE | DESIGNATION |
|---|---|
Engine Directional ReferencesSubtask 70-40-00-860-050-A
A. Not Applicable
4. ProcedureSubtask 70-40-00-910-053-A
A. Flange Identification
(1) The external flanges of the engine have been assigned letter designations. The letter designation will be used for flange identification wherever it is necessary to be explicit about flange location, such as positioning of bracket, clamps, bolts, etc.
(2) Horizontal flanges are identified by:
(1) The external flanges of the engine have been assigned letter designations. The letter designation will be used for flange identification wherever it is necessary to be explicit about flange location, such as positioning of bracket, clamps, bolts, etc.
(2) Horizontal flanges are identified by:
- Front stator case horizontal left flange.
- Front stator case horizontal right flange.