SPOP 169 - Application of PWA 36246 (Non-Leaded) Anti-Seize Paste [PW11]

TASK 70-28-00-910-807-A
SPOP 169 - Application of PWA 36246 (Non-Leaded) Anti-Seize Paste

WARNING: BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	BRUSH - BRISTLED, SOFT
No specific	1	BRUSH - WIRE

B. Consumable Materials

REFERENCE	DESIGNATION
(Material No.P05-005)	lint-free cotton cloth
(Material No.P06-054)	Antigalling Compound
(Material No.P11-027)	Petroleum Solvent
(Material No.P11-065)	Acetone

3. Job Set-up
Subtask 70-28-00-860-055-A ** ON A/C NOT FOR ALL

A. Not Applicable

4. Procedure
Subtask 70-28-00-910-055-A ** ON A/C NOT FOR ALL

A. Application of PWA 36246 (Non-Leaded) Anti-Seize Paste
(1) Remove the coating with a BRUSH - WIRE and Petroleum Solvent (Material No.P11-027) or Acetone (Material No.P11-065) .
(2) Wipe with a lint-free cotton cloth (Material No.P05-005) .
(3) Apply Antigalling Compound (Material No.P06-054) with a BRUSH - BRISTLED, SOFT or swab to the area specified in the repair.

NOTE: For new or refurbished bolts or nuts with baked-on lubricant, do not do the wet application procedure.

(4) Install the part in one hour or less after you apply the Antigalling Compound (Material No.P06-054) .
(5) Use a lint-free cotton cloth (Material No.P05-005) to remove unwanted Antigalling Compound (Material No.P06-054) .

[Rev.10 from 2021] 2026.04.01 02:20:38 UTC