SPOP 209 - Degreasing of Parts by Aqueous Cleaning [PW11]

TASK 70-27-00-910-805-A
SPOP 209 - Degreasing of Parts by Aqueous Cleaning

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	BRUSH - NON METALLIC, SOFT
No specific	AR	PAD - UNIVERSAL ATTACH

B. Consumable Materials

REFERENCE	DESIGNATION
(Material No.P05-005)	lint-free cotton cloth
(Material No.P11-049)	aqueous cleaner

3. Job Set-up
Subtask 70-27-00-941-051-A ** ON A/C NOT FOR ALL

A. Not Applicable

4. Procedure
Subtask 70-27-00-110-058-A ** ON A/C NOT FOR ALL

WARNING: BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.

A. Degreasing of Parts by Aqueous Cleaning (Aqueous Spray or Wiping without Rinse)

NOTE: Always obey the specific procedures and limits in the specific AMM maintenance tasks.

(1) Remove light oils, grease, fingerprints, dust and soot from the engine external parts as follows:

CAUTION: PARTS COATED WITH PWA 77 DIFFUSED ALUMINIDE CAN BE CLEANED ONLY WITH SPOP 209 AQUEOUS DEGREASING. THE USE OF OTHER ALKALINE CLEANERS WILL CAUSE DETERIORATION OR REMOVAL OF THIS COATING.

CAUTION: PARTS COATED WITH PWA 110 (PWA 595) ALUMINUM COATING CAN BE CLEANED ONLY WITH SPOP 209. THE USE OF OTHER ALKALINE CLEANERS WILL CAUSE DETERIORATION OR REMOVAL OF THIS COATING.

(a) Degrease the part by one of the subsequent steps:
1 Wipe the part with a clean lint-free cotton cloth (Material No.P05-005) made wet with aqueous cleaner (Material No.P11-049)
a Use the aqueous cleaner (Material No.P11-049) as received.
b Do not dilute the aqueous cleaner (Material No.P11-049) or make a solution.
c Pour the solvent onto the lint-free cotton cloth (Material No.P05-005) to keep unwanted material from the wiping solvent.
d Do not dip the lint-free cotton cloth (Material No.P05-005) into the solvent container.
2 Spray the aqueous cleaner (Material No.P11-049) on the part.
(b) If necessary, scrub the part with a soft non-metallic BRUSH - NON METALLIC, SOFT or a PAD - UNIVERSAL ATTACH pad.
(c) Wipe dry with a clean lint-free cotton cloth (Material No.P05-005) .

[Rev.10 from 2021] 2026.04.01 13:02:07 UTC