DOC AIRBUS | AMM A320FPenetrating Oils - General Information [IAE]
TASK 70-11-50-600-801-A
Penetrating Oils - General Information
This procedure gives the guidelines for lubrication of torqued fasteners at disassembly.
2. Job Set-up Information
A. Consumable Materials
B. Work Zones and Access Panels
3. Job Set-up
Subtask 70-11-50-941-055-A ** ON A/C NOT FOR ALL
Subtask 70-11-50-640-050-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.01 02:19:29 UTC
Penetrating Oils - General Information
WARNING:
BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.
ZONE: 400
1. Reason for the JobThis procedure gives the guidelines for lubrication of torqued fasteners at disassembly.
2. Job Set-up Information
A. Consumable Materials
| REFERENCE | DESIGNATION |
|---|---|
| (Material No.V10-058) | Penetrating oil |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 400 | POWER PLANT, NACELLES AND PYLONS |
Subtask 70-11-50-941-055-A ** ON A/C NOT FOR ALL
A. Not Applicable
4. ProcedureSubtask 70-11-50-640-050-A ** ON A/C NOT FOR ALL
A. Penetrating Oils - General Information
NOTE: Penetrating oil (Material No.V10-058) is approved for aluminum, magnesium, titanium, steel, nickel and cobalt alloy parts.
(1) To make disassembly of bolts, nuts and snap fits much easier, apply Penetrating oil (Material No.V10-058) to the necessary area(s).