Penetrating Oils - General Information [IAE]

TASK 70-11-11-640-801-A
Penetrating Oils - General Information

WARNING: REFER TO THE MANUFACTURER'S MATERIAL SAFETY DATA SHEETS FOR CONSUMABLE MATERIAL INFORMATION. THIS INCLUDES HAZARDOUS INGREDIENTS, PHYSICAL AND CHEMICAL CHARACTERISTICS, FIRE, EXPLOSION, REACTIVITY, HEALTH HAZARD DATA, PRECAUTIONS FOR SAFE HANDLING, AND USE OF CONTROL MEASURES.

WARNING: BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.

ZONE: 400

1. Reason for the Job
To provide guidelines for lubrication of torqued fasteners at disassembly.
2. Job Set-up Information
A. Consumable Materials

REFERENCE	DESIGNATION
(Material No.V10-058)	Penetrating oil

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
400	POWER PLANT, NACELLES AND PYLONS

3. Job Set-up
Subtask 70-11-11-941-050-A ** ON A/C NOT FOR ALL

A. Not Applicable

4. Procedure
Subtask 70-11-11-640-050-A ** ON A/C NOT FOR ALL

A. General Information - Penetrating Oils

NOTE: Penetrating oil (Material No.V10-058) is approved for aluminum, magnesium, titanium, steel, nickel and cobalt alloy parts.

(1) To make disassembly of bolts, nuts and snap fits much easier, apply Penetrating oil (Material No.V10-058) to the necessary area(s).

[Rev.10 from 2021] 2026.04.01 02:19:19 UTC