Removal of the Protective Cover of the ACT-Equipment Support Door

TASK 57-17-11-000-003-A
Removal of the Protective Cover of the ACT-Equipment Support Door

ZONE: 147
ZONE: 148

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
147	MAIN GEAR WELL AND HYDRAULIC COMPARTMENT
148	MAIN GEAR WELL AND HYDRAULIC COMPARTMENT

C. Referenced Information

REFERENCE	DESIGNATION
TASK 32-12-00-010-001-A	Open the Main Gear Doors for Access
Protective Cover

3. Job Set-up
Subtask 57-17-11-010-054-A ** ON A/C NOT FOR ALL

A. Get Access
(1) Open the MLG doors and install the safety devices (Ref. AMM TASK 32-12-00-010-001).
(2) Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position at zone 147 or 148.

4. Procedure
Subtask 57-17-11-020-054-A ** ON A/C NOT FOR ALL

A. Removal of the Protective Cover

Protective Cover ** ON A/C NOT FOR ALL

(1) Remove the bolt (55), the washer (52) and disconnect the bonding strip (56).
(2) Remove the screws (53) and the washers (54).
(3) Remove the protective cover (51) from the ACT-equipment support door (57).

[Rev.10 from 2021] 2026.04.01 02:08:52 UTC