W DOC AIRBUS | AMM A320F

Cleaning the Outer Surface of the Outer Window Panes


TASK 56-21-13-100-002-A
Cleaning the Outer Surface of the Outer Window Panes


NOTE: You must not use a dry cloth to clean the window panes. A dry cloth can scratch the surface of the window panes and cause the build-up of static electrical charges.
1. Reason for the Job
Self explanatory
2. Job Set-up Information
 A. Fixtures, Tools, Test and Support Equipment
REFERENCE
QTY
DESIGNATION
No specific
1
ACCESS PLATFORM 3M (10 FT)
No specific
1
CHAMOIS LEATHER
No specific
1
GLOVES - COTTON, LINT-FREE, CLEAN
No specific
AR
SPONGE
 B. Consumable Materials
REFERENCE
DESIGNATION
(Material No.08ABC1)
Aqueous Cleaner-Aircraft Exterior Pressure Spraying -
(Material No.08CSA9)
Cleaner-Plastic - -
3. Job Set-up
Subtask 56-21-13-941-050-A
A. Get Access
   (1) Put the ACCESS PLATFORM 3M (10 FT) in position.
4. Procedure
Subtask 56-21-13-160-050-A
A. Clean the window panes with a large quantity of warm water.
   (1) Make sure that the window panes are free from abrasive particles.
   (2) Mix the Aqueous Cleaner-Aircraft Exterior Pressure Spraying - (Material No.08ABC1) and water to make a mild cleaning solution.
CAUTION: USE ONLY THE SPECIFIED MATERIALS AND OBEY THE INSTRUCTIONS FROM THE MATERIAL MANUFACTURERS. OTHER MATERIALS CAN CAUSE DAMAGE TO THE SURFACE PROTECTION OF THE COMPONENTS AND THE RELATED AREA.
   (3) Clean the window panes with a mild soap solution. Use a GLOVES - COTTON, LINT-FREE, CLEAN or a CHAMOIS LEATHER or a SPONGE.
   (4) Rinse the window panes with a large quantity of warm water.
   (5) Dry the window panes with the chamois leather.
   (6) If stains or dirty marks remain:
     (a) Clean the window panes with the Cleaner-Plastic - - (Material No.08CSA9) and a boiled glove cloth.
     (b) Rinse the window panes with a large quantity of warm water.
     (c) Dry the window panes with the chamois leather.
5. Close-up
Subtask 56-21-13-942-050-A
A. Close Access
   (1) Make sure that the work area is clean and clear of tools and other items.
   (2) Remove the access platform(s).
   (3) Remove the ground support and maintenance equipment, the special and standard tools and all other items.
[Rev.10 from 2021] 2026.04.01 02:07:52 UTC