Removal of the Door Fairings and Access Panels

TASK 52-32-33-000-001-A
Removal of the Door Fairings and Access Panels

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	ACCESS PLATFORM 2M (6 FT)
No specific	AR	SAFETY CLIP - CIRCUIT BREAKER

B. Referenced Information

REFERENCE	DESIGNATION
Door Fairings 826CR and 826DR
Access Covers 826AR and 826BR

3. Job Set-up
Subtask 52-32-33-860-050-A ** ON A/C NOT FOR ALL

A. Aircraft Maintenance Configuration
(1) Put the ACCESS PLATFORM 2M (6 FT) in position below the aft cargo compartment door (referred to as cargo door).

Subtask 52-32-33-865-050-A ** ON A/C NOT FOR ALL

B. Open, safety and tag this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
121VU	HYDRAULIC/HYD POWER/Y	3803GX	N30
122VU	DOORS/CARGO	1MJ	T12
123VU	Y HYD/ELEC/PUMP	3802GX	AB06
123VU	Y HYD/ELEC/ELEC PUMP/NORM	3801GX	AB03

4. Procedure
Subtask 52-32-33-020-050-B ** ON A/C NOT FOR ALL

A. Removal of the Door Fairings 826CR/826DR and the Access Panels 826AR/826BR
(1) Remove the door fairing (7) as follows:
(a) Remove the screws (4) and (6) and the washers (3) and (5) from the door fairing (7).
(b) Remove the door fairing (7) from the door brackets (2) and (8).
(2) Remove the door fairing (15) as follows:
(a) Remove the screws (12) and (14) and the washers (11) and (13) from the door fairing (15).
(b) Remove the door fairing (15) from the fairing fittings (1), (9) and (10) and the door bracket (8).
(3) Release the quick release fasteners (23) and remove the access panels (21) and/or (22) from the cargo door.

[Rev.10 from 2021] 2026.04.01 01:43:08 UTC