General Visual Inspection of Forward Cargo Compartment Door Skin, External Surface

TASK 52-31-11-200-011-A
General Visual Inspection of Forward Cargo Compartment Door Skin, External Surface

WARNING: BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.

ZONE: 825

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE

B. Consumable Materials

REFERENCE	DESIGNATION
(Material No.08BAA9)	Non Aqueous Cleaner-General - -
(Material No.14SBA1)	Textile-Lint free Cotton -

C. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
825	FORWARD CARGO COMPARTMENT DOOR

D. Referenced Information

REFERENCE	DESIGNATION
SRM 511100
SRM 512200
SRM 512300
CMM 523114	(for corrective action)
External Surface of FWD Cargo-Compartment Door

3. Job Set-up
Subtask 52-31-11-941-066-A

A. Get Access
(1) Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position at closed forward cargo-compartment door 825.

Subtask 52-31-11-110-051-A

B. Preparation of the Inspection Area
(1) Make sure that the inspection area is sufficiently clean to do a satisfactory inspection of the area.
(2) If necessary, clean the inspection area with Non Aqueous Cleaner-General - - (Material No.08BAA9) and a Textile-Lint free Cotton - (Material No.14SBA1) .

4. Procedure
Subtask 52-31-11-210-071-B

A. Inspection
(1) Do a general visual inspection of the external surface of the forward cargo-compartment door skin for damage or discontinuities.
(2) Make sure that there is no:
(a) Corrosion damage:
If you find corrosion, refer to the Structural Repair Manual ( SRM 512200) for the corrosion types, inspection, removal and subsequent corrosion protection.
(b) Other damage (scratches, cracks, gouges, dents, creases):
If you find this type of damage, refer to the Structural Repair Manual ( SRM 511100) for the damage types, classification and corrective action.
(c) Paint layer damage:
If you find this type of damage, refer to the Structural Repair Manual ( SRM 512300) for general data for paint layers.
(3) Examine the indication windows of the access panel 825AR for cracks and scratches.
(a) If there are cracks, replace the panel of the indication windows CMM 523114.
(b) If there are scratches on the window panel of the indication windows, replace it at not more than 100FC after this inspection.

5. Close-up
Subtask 52-31-11-942-067-A

A. Close Access
(1) Remove the access platform(s).

[Rev.10 from 2021] 2026.04.01 01:41:03 UTC