General Visual Inspection of Aft Emergency Exits, External Surface, LH/RH

TASK 52-22-11-200-007-A
General Visual Inspection of Aft Emergency Exits, External Surface, LH/RH

WARNING: BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	ACCESS PLATFORM 5M (16 FT)- ADJUSTABLE

B. Consumable Materials

REFERENCE	DESIGNATION
(Material No.08BAA9)	Non Aqueous Cleaner-General - -
(Material No.14SBA1)	Textile-Lint free Cotton -

C. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
835, 845
834, 844

D. Referenced Information

REFERENCE	DESIGNATION
SRM 511100
SRM 512200
SRM 512300
Aft Emergency-Exit External Surface ** ON A/C NOT FOR ALL
Aft Emergency-Exit External Surface ** ON A/C NOT FOR ALL

3. Job Set-up
Subtask 52-22-11-941-051-A ** ON A/C NOT FOR ALL

A. Get Access
(1) Put the ACCESS PLATFORM 5M (16 FT)- ADJUSTABLE in position at closed aft emergency exit 834( 844).

Subtask 52-22-11-941-051-B ** ON A/C NOT FOR ALL

A. Get Access
(1) Put the ACCESS PLATFORM 5M (16 FT)- ADJUSTABLE in position at closed aft emergency exit 835( 845).

Subtask 52-22-11-110-050-A ** ON A/C NOT FOR ALL

B. Preparation of the Inspection Area
(1) Make sure that the inspection area is sufficiently clean to do a satisfactory inspection of the area.
(2) If not, clean the inspection area with Non Aqueous Cleaner-General - - (Material No.08BAA9) and a Textile-Lint free Cotton - (Material No.14SBA1) .

4. Procedure
Subtask 52-22-11-210-055-A ** ON A/C NOT FOR ALL

A. Inspection
(1) Do a general visual inspection of the aft emergency exits, external surface, LH/RH for damage or discontinuities.
(2) Make sure that there is no:
(a) Corrosion damage:

If you find corrosion, refer to the Structural Repair Manual ( SRM 512200) for the corrosion types, inspection, removal and subsequent corrosion protection.

(b) Other damage (scratches, cracks, gouges, dents, creases):

If you find this type of damage, refer to the Structural Repair Manual ( SRM 511100) for the damage types, classification and corrective action.

If you find this type of damage, refer to the Structural Repair Manual ( SRM 512300) for general data for paint layers.

5. Close-up
Subtask 52-22-11-942-052-A ** ON A/C NOT FOR ALL

A. Close Access
(1) Remove the access platform(s).

[Rev.10 from 2021] 2026.04.01 01:39:15 UTC