DOC AIRBUS | AMM A320FRepair of Dents in Skin Panels
TASK 51-73-11-300-003-A
Repair of Dents in Skin Panels
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Consumable Materials
C. Referenced Information
3. Job Set-up
Subtask 51-73-11-941-054-A
Subtask 51-73-11-320-053-A
Subtask 51-73-11-942-054-A
[Rev.10 from 2021]
2026.04.01 01:34:26 UTC
Repair of Dents in Skin Panels
WARNING:
BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.
1. Reason for the JobSelf explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | 1 | CLOTH-EMERY (GRADE 240) |
| No specific | 1 | CLOTH-EMERY (GRADE 400) |
| No specific | 1 | SPATULA - NON METALLIC |
| REFERENCE | DESIGNATION |
|---|---|
| (Material No.08BAA9) | Non Aqueous Cleaner-General - - |
| (Material No.13FBC6) | Paste Adhesive-Epoxy Core Restoration - |
| (Material No.14SBA1) | Textile-Lint free Cotton - |
| No specific | masking paper |
| No specific | masking tape |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 51-75-12-300-001-A | Repair of Major Paint Damage on Light Alloy and Composite Material |
| SRM 517300 |
Subtask 51-73-11-941-054-A
A. Get access to the area of the damage.
4. ProcedureSubtask 51-73-11-320-053-A
A. Repair of Dents
(1) Measure the depth of the dent.
(2) Refer to the ASRM SRM 517300 and the applicable ASRM-chapter 52 thru 57 for the permitted limits of the dent.
(3) If a repair of the dent is necessary:
(a) Remove all of the paint from the area of the dent and 10 mm (0.3937 in.) around the dent with CLOTH-EMERY (GRADE 240).
(b) Clean the repair area with the Non Aqueous Cleaner-General - - (Material No.08BAA9) and a clean lint-free cloth Textile-Lint free Cotton - (Material No.14SBA1)
(4) Apply masking paper and masking tape to the area around the dent.
(5) Fill the dent:
(a) Mix the necessary quantity of the Paste Adhesive-Epoxy Core Restoration - (Material No.13FBC6) .
(b) Apply the Paste Adhesive-Epoxy Core Restoration - (Material No.13FBC6) to the repair area with a SPATULA - NON METALLIC.
(6) Make sure that the area is dry before you continue with the steps that follow.
(7) Smooth the Paste Adhesive-Epoxy Core Restoration - (Material No.13FBC6) to the contours of the component with CLOTH-EMERY (GRADE 240).
(8) Smooth the Paste Adhesive-Epoxy Core Restoration - (Material No.13FBC6) to the contours of the component with CLOTH-EMERY (GRADE 400).
(9) Apply the applicable surface protection (Ref. AMM TASK 51-75-12-300-001).
5. Close-up(1) Measure the depth of the dent.
(2) Refer to the ASRM SRM 517300 and the applicable ASRM-chapter 52 thru 57 for the permitted limits of the dent.
(3) If a repair of the dent is necessary:
(a) Remove all of the paint from the area of the dent and 10 mm (0.3937 in.) around the dent with CLOTH-EMERY (GRADE 240).
(b) Clean the repair area with the Non Aqueous Cleaner-General - - (Material No.08BAA9) and a clean lint-free cloth Textile-Lint free Cotton - (Material No.14SBA1)
(4) Apply masking paper and masking tape to the area around the dent.
(5) Fill the dent:
(a) Mix the necessary quantity of the Paste Adhesive-Epoxy Core Restoration - (Material No.13FBC6) .
(b) Apply the Paste Adhesive-Epoxy Core Restoration - (Material No.13FBC6) to the repair area with a SPATULA - NON METALLIC.
(6) Make sure that the area is dry before you continue with the steps that follow.
(7) Smooth the Paste Adhesive-Epoxy Core Restoration - (Material No.13FBC6) to the contours of the component with CLOTH-EMERY (GRADE 240).
(8) Smooth the Paste Adhesive-Epoxy Core Restoration - (Material No.13FBC6) to the contours of the component with CLOTH-EMERY (GRADE 400).
(9) Apply the applicable surface protection (Ref. AMM TASK 51-75-12-300-001).
Subtask 51-73-11-942-054-A
A. Remove the ground support and maintenance equipment, the special and standard tools and all other items.