Wax and Polish Protection on Unpainted Light Alloy Areas

TASK 51-21-00-916-001-A
Wax and Polish Protection on Unpainted Light Alloy Areas

WARNING: DO NOT GET THE FLUID ON YOUR SKIN OR IN YOUR EYES. IF YOU DO:

FLUSH IT AWAY WITH CLEAN WATER
GET MEDICAL AID.

WARNING: BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.

NOTE: Do not polish or wax the slats in the unpainted areas of the leading edge.

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	ACCESS PLATFORM 18M (59 FT) - ADJUSTABLE

B. Consumable Materials

REFERENCE	DESIGNATION
(Material No.08ABC1)	Aqueous Cleaner-Aircraft Exterior Pressure Spraying -
(Material No.14EEA1)	Polishing Paste-Aluminium Alloys - -
(Material No.14SBA1)	Textile-Lint free Cotton -

3. Job Set-up
Subtask 51-21-00-941-050-A

A. If necessary, put an ACCESS PLATFORM 18M (59 FT) - ADJUSTABLE in position.

4. Procedure
Subtask 51-21-00-110-050-A

A. Wax and polish.

NOTE: Do not polish or wax the slats in the unpainted areas of the leading edge.

(1) Clean the area with Aqueous Cleaner-Aircraft Exterior Pressure Spraying - (Material No.08ABC1) and a Textile-Lint free Cotton - (Material No.14SBA1) .
(2) If necessary, repair the corrosion damage (Ref SRM 51-74-00).
(3) Wax and polish the area with Polishing Paste-Aluminium Alloys - - (Material No.14EEA1) and a lint-free cloth.

5. Close-up
Subtask 51-21-00-942-050-A

A. Close-up
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Remove the access platform(s).

[Rev.10 from 2021] 2026.04.01 12:43:35 UTC