Replacement of the Lens Assembly of the Taxi Light - (LED Light)

TASK 33-46-12-960-802-A
Replacement of the Lens Assembly of the Taxi Light - (LED Light)

WARNING: WEAR GLASSES AND PROTECTIVE CLOTHING WHEN YOU DO WORK ON THE LIGHT. THE LAMP IS PRESSURIZED AND AN EXPLOSION CAN OCCUR.

ZONE: 711

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	SAFETY CLIP - CIRCUIT BREAKER
No specific	Torque wrench: range to between 10 and 8 lbf.in (0.11 and 0.09 m.daN )

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
711	NOSE GEAR

C. Expendable Parts

FIG.ITEM	DESIGNATION	IPC-CSN
2	LENS ASSY	AIPC 33-46-12-01-010

D. Referenced Information

REFERENCE	DESIGNATION
TASK 33-46-00-710-001-A	Operational Test of the Taxi and Take Off Lights
Lens Assembly of the Taxi Light - (LED Light)

3. Job Set-up
Subtask 33-46-12-865-075-A

A. Open, safety and tag this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C ALL
122VU	LIGHTING/EXT LT/TAXI AND TAKE OFF/TAXI	1LR	W08

4. Procedure
Subtask 33-46-12-020-058-B

A. Removal of the Lens Assy
(1) Remove the screws (3) of the taxi light (1).
(2) Remove the lens assy (2).

Subtask 33-46-12-420-058-B

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C ALL
122VU	LIGHTING/EXT LT/TAXI AND TAKE OFF/TAXI	1LR	W08

5. Close-up
Subtask 33-46-12-942-056-B

A. Make sure that the work area is clean and clear of tools and other items.

[Rev.10 from 2021] 2026.04.01 00:56:01 UTC