DOC AIRBUS | AMM A320FReplacement of the Glass Assembly of the Take Off Light - (LED Light)
TASK 33-46-11-960-802-A
Replacement of the Glass Assembly of the Take Off Light - (LED Light)
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Expendable Parts
D. Referenced Information
3. Job Set-up
Subtask 33-46-11-865-074-A ** ON A/C NOT FOR ALL
Subtask 33-46-11-020-058-A ** ON A/C NOT FOR ALL
Subtask 33-46-11-942-056-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.01 12:33:54 UTC
Replacement of the Glass Assembly of the Take Off Light - (LED Light)
WARNING:
WEAR GLASSES AND PROTECTIVE CLOTHING WHEN YOU DO WORK ON THE LIGHT. THE LAMP IS PRESSURIZED AND AN EXPLOSION CAN OCCUR.
ZONE: 711
1. Reason for the JobSelf explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | AR | SAFETY CLIP - CIRCUIT BREAKER |
| No specific | Torque wrench: range to between 0.0935 and 0.0765 m.daN (8.27 and 6.77 lbf.in )  |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 711 | NOSE GEAR |
| FIG.ITEM | DESIGNATION | IPC-CSN |
|---|---|---|
| 2 | GLASS ASSY | AIPC 33-46-11-01-010 |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 33-46-00-710-001-A | Operational Test of the Taxi and Take Off Lights |
Glass Assembly of the Take Off Light - (LED Light)Subtask 33-46-11-865-074-A ** ON A/C NOT FOR ALL
A. Open, safety and tag this(these) circuit breaker(s):
4. Procedure| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 122VU | LIGHTING/EXT LT/TAXI AND TAKE OFF/TO | 3LR | W07 |
Subtask 33-46-11-020-058-A ** ON A/C NOT FOR ALL
A. Removal of the Glass Assembly
(1) Loosen the captive screws (3) of the take off light (1).
(2) Remove the glass assy (2).
Subtask 33-46-11-420-058-A ** ON A/C NOT FOR ALL (1) Loosen the captive screws (3) of the take off light (1).
(2) Remove the glass assy (2).
B. Installation of the Glass Assembly
(1) Install a new AIPC 33-46-11-01-010 GLASS ASSY (2) on the take off light (1).
(2) TORQUE the captive screws (3) to between 0.0935 and 0.0765 m.daN (8.27 and 6.77 lbf.in ).
Subtask 33-46-11-865-075-A ** ON A/C NOT FOR ALL (1) Install a new AIPC 33-46-11-01-010 GLASS ASSY (2) on the take off light (1).
(2) TORQUE the captive screws (3) to between 0.0935 and 0.0765 m.daN (8.27 and 6.77 lbf.in )
. C. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):
Subtask 33-46-11-710-056-A ** ON A/C NOT FOR ALL | PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 122VU | LIGHTING/EXT LT/TAXI AND TAKE OFF/TO | 3LR | W07 |
D. Operational Test of the Light
(1) Do the operational test of the take off light (Ref. AMM TASK 33-46-00-710-001).
5. Close-up(1) Do the operational test of the take off light (Ref. AMM TASK 33-46-00-710-001).
Subtask 33-46-11-942-056-A ** ON A/C NOT FOR ALL
A. Make sure that the work area is clean and clear of tools and other items.