Removal of the Lighting Controller

TASK 33-13-51-000-001-A
Removal of the Lighting Controller

ZONE: 211
ZONE: 212
FIN: 16LF
FIN: 30LF
FIN: 6LF

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	CAP - BLANKING
No specific	AR	SAFETY CLIP - CIRCUIT BREAKER
FOR [16LF] (CONTROLLER-LIGHTING)
FOR [30LF] (CONTROLLER-LIGHTING)
No specific	AR	ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
211	COCKPIT
212	COCKPIT
FOR [16LF] (CONTROLLER-LIGHTING)
FOR [30LF] (CONTROLLER-LIGHTING)
811

C. Referenced Information

REFERENCE	DESIGNATION
Lighting Controller ** ON A/C NOT FOR ALL
Lighting Controller ** ON A/C NOT FOR ALL

3. Job Set-up
Subtask 33-13-51-865-050-A

A. Open, safety and tag this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C ALL
FOR FIN: 6LF (CONTROLLERLIGHTING)
122VU	LIGHTING/INSTL LT/OVHD/PNL	3LF	Y03
FOR FIN: 16LF (CONTROLLERLIGHTING)
122VU	LIGHTING/INSTL LT/MAIN INST/PNL AND/PED	4LF	Y04
FOR FIN: 30LF (CONTROLLERLIGHTING)
122VU	LIGHTING/INSTL LT/GLARE/SHLD	5LF	Y05

Subtask 33-13-51-010-050-A

B. Get Access
(1) FOR [16LF] (CONTROLLER-LIGHTING), [30LF] (CONTROLLER-LIGHTING)
Put the ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE in position at the zone 121.
(2) Open the access door 811.
(a) FOR [16LF] (CONTROLLER-LIGHTING), [30LF] (CONTROLLER-LIGHTING)
811
(3) FOR [6LF] (CONTROLLER-LIGHTING)
Remove the ceiling panel 211HC with an ALLEN wrench.

4. Procedure
Subtask 33-13-51-020-050-A

A. Removal of the Lighting Controller
(1) Disconnect the connector (4).
(2) Remove the four screws (3) and the lockwashers (2). During this operation, hold the lighting controller (1).
(3) Remove the lighting controller (1).
(4) Put CAP - BLANKING on the connectors (4) and (5).

[Rev.10 from 2021] 2026.04.01 00:52:58 UTC