Removal of the Integrally-Lighted Identification Plate

TASK 33-13-44-000-801-A
Removal of the Integrally-Lighted Identification Plate

ZONE: 210
ZONE: 211
ZONE: 212
FIN: 32LF
FIN: 33LF

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	SAFETY CLIP - CIRCUIT BREAKER

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
210	CKPT,FWD COMPT BHD TO FLT COMPT BULKHEAD
211	COCKPIT
212	COCKPIT

C. Referenced Information

REFERENCE	DESIGNATION
Integrally-Lighted Identification Plate

3. Job Set-up
Subtask 33-13-44-865-050-A

A. Open, safety and tag this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C ALL
122VU	LIGHTING/INSTL LT/GLARE/SHLD	5LF	Y05

4. Procedure
Subtask 33-13-44-020-050-A

A. Removal of the Integrally-Lighted Identification Plate (33LF)
(1) Remove the four screws (2).
(2) Pull the CAPTAIN glareshield panel 131VU (1).
(3) Remove the integrally-lighted identification plate (3).

Subtask 33-13-44-020-051-A

B. Removal of the Integrally-Lighted Identification Plate (32LF)
(1) Remove the four screws (6).
(2) Pull the F/O glareshield panel 130VU (4).
(3) Remove the integrally-lighted identification plate (5).

[Rev.10 from 2021] 2026.04.01 00:52:55 UTC