DOC AIRBUS | AMM A320FRemoval of the Integrally-Lighted Identification Plate
TASK 33-13-43-000-801-A
Removal of the Integrally-Lighted Identification Plate
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 33-13-43-865-050-A
Subtask 33-13-43-020-050-A
[Rev.10 from 2021]
2026.04.01 00:52:53 UTC
Removal of the Integrally-Lighted Identification Plate
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | AR | SAFETY CLIP - CIRCUIT BREAKER |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 211 | COCKPIT |
| 212 | COCKPIT |
| REFERENCE | DESIGNATION |
|---|---|
| ESPM 204523 | |
Integrally-Lighted Identification PlateSubtask 33-13-43-865-050-A
A. Open, safety and tag this(these) circuit breaker(s):
4. Procedure| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C ALL | |||
| 122VU | LIGHTING/INSTL LT/MAIN INST/PNL AND/PED | 4LF | Y04 |
Subtask 33-13-43-020-050-A
A. Removal of the Integrally-Lighted Identification Plate (27LF)
(1) Disable the knobs, the nuts and the washers of the PDF & ND brightness and loud speaker potentiometer ESPM 204523.
(2) Loosen the four quarter-turn fasteners (13).
(3) Pull the CAPT LIGHTING/LOUD SPEAKER control panel 301VU (16).
(4) Remove the four screws (15).
(5) Remove the integrally-lighted identification plate (14).
Subtask 33-13-43-020-051-A (1) Disable the knobs, the nuts and the washers of the PDF & ND brightness and loud speaker potentiometer ESPM 204523.
(2) Loosen the four quarter-turn fasteners (13).
(3) Pull the CAPT LIGHTING/LOUD SPEAKER control panel 301VU (16).
(4) Remove the four screws (15).
(5) Remove the integrally-lighted identification plate (14).
B. Removal of the Integrally-Lighted Identification Plate (29LF)
(1) Disable the knobs, the nuts and the washers of the PDF & brightness and loud speaker potentiometers ESPM 204523.
(2) Loosen the four quarter-turn fasteners (1).
(3) Pull the F/O LIGHTING/LOUD SPEAKER control panel 500VU (4).
(4) Remove the four screws (3).
(5) Remove the integrally-lighted identification plate (2).
Subtask 33-13-43-020-052-A (1) Disable the knobs, the nuts and the washers of the PDF & brightness and loud speaker potentiometers ESPM 204523.
(2) Loosen the four quarter-turn fasteners (1).
(3) Pull the F/O LIGHTING/LOUD SPEAKER control panel 500VU (4).
(4) Remove the four screws (3).
(5) Remove the integrally-lighted identification plate (2).
C. Removal of the Integrally-Lighted Identification Plate (28LF)
(1) Loosen the three quarter-turn fasteners (6).
(2) Pull the LANDING GEAR CTL and IND control panel 402VU (5).
(3) Remove the three screws (8).
(4) Remove the integrally-lighted identification plate (7).
Subtask 33-13-43-020-053-A (1) Loosen the three quarter-turn fasteners (6).
(2) Pull the LANDING GEAR CTL and IND control panel 402VU (5).
(3) Remove the three screws (8).
(4) Remove the integrally-lighted identification plate (7).
D. Removal of the Integrally-Lighted Identification Plate (41LF), if Installed
(1) Loosen the two quarter-turn fasteners (10).
(2) Pull the TERR ON ND control panel 403VU (9).
(3) Remove the two screws (12).
(4) Remove the integrally-lighted identification plate (11).
(1) Loosen the two quarter-turn fasteners (10).
(2) Pull the TERR ON ND control panel 403VU (9).
(3) Remove the two screws (12).
(4) Remove the integrally-lighted identification plate (11).